Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Filtres à air et filtration chimique
Filtre moléculaire de gaz acide
A rigid molecular-filter cell filled with acid-targeted adsorbent to reduce corrosive gaseous contaminants before they reach clean processes and sensitive electronics.
- Acid-Selective Adsorbent
- Deep Media Bed
- Low-Dusting Retainers
- Gasketed Steel Cell
Introduction de produit
This filter places a packed bed of impregnated activated alumina, activated carbon or hybrid pellets between perforated retaining screens. The chemically treated surface captures and reacts with acidic gases such as hydrogen sulfide, sulfur dioxide, chlorine and selected nitrogen oxides. A sealed galvanized or stainless-steel frame prevents bypass, while fine outlet scrim limits carryover of adsorbent dust into controlled air systems. The configuration is suitable for make-up air, recirculation and corrosion-control stages where ordinary particle filters cannot remove molecules.
Key Features
Impregnated media targets reactive acid gases rather than only general odours.
Corrosion-resistant screens support the pellet bed without obstructing airflow.
Replaceable or refillable constructions allow media selection to follow the contaminant profile.
Préoccupations du client produit
Trace acidic gases can corrode contacts and process surfaces even when particulate air quality appears acceptable.
Copper and silver contacts tarnish despite high-efficiency particle filtration.An acid-selective adsorbent stage removes molecular contaminants that pass through particulate media.
Loose pellets settle and create an untreated path at the top of the cell.Vibration-filled media and internal compression retain an even bed throughout transport and operation.
Adsorbent dust migrates toward sensitive production equipment.Perforated retainers and downstream nonwoven scrim contain fines inside the filter cell.
A single carbon grade performs poorly against a changing acid-gas mixture.Activated alumina, impregnated carbon or hybrid blends can be selected for the actual contaminant spectrum.
Les applications typiques
Semiconductor make-up airData-centre corrosion controlPulp and paper control roomsChemical process ventilationWastewater odour treatment
Paramètres techniques
Typical construction ranges for an industrial acid-gas molecular filter are listed below.
| Matériaux de base | Impregnated activated alumina, acid-grade activated carbon or hybrid spherical adsorbent |
|---|---|
| Panneau épaisseur | 150–292 mm overall filter depth |
| Largeur effective | 305–610 mm nominal cell width |
| Longueur maximale | Up to 610 mm nominal cell height |
| Acier face épaisseur | 0.8–1.2 mm galvanized or 304 stainless-steel frame and screens |
| Densité Core | 550–850 kg/m³ packed adsorbent bulk density |
| Conductivité thermique | 0.10–0.25 W/(m·K) for the packed adsorbent bed |
| surface finie | Clean galvanized steel, brushed 304 stainless steel or white powder coat |
| Type joint | Rigid box cell with sealed media screens and continuous neoprene or EPDM face gasket |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Impregnated alumina or carbon mediaGalvanized or stainless-steel frameHalf-size and full-size cellsRefillable or disposable construction
Planning a Acid Gas Molecular Filter specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
