EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Furniture and Stainless Steel Products
Shoe Changing Bench
A seated Type 304 stainless footwear-changing bench with a perforated top, one open lower shoe shelf and adjustable feet for comfortable donning of cleanroom shoes or overshoes.
- Perforated stainless seat
- Single open shoe-storage shelf
- Rounded snag-free edges
- Four adjustable leveling feet
Product Introduction
The shoe changing bench provides a stable 450 mm-high seat for personnel who need to remove street footwear or fit cleanroom shoes and overshoes. Regular perforations across the Type 304 stainless seat reduce broad particle-collecting area and leave the lower storage zone visible. One open shelf keeps the user's alternate footwear beneath the seat rather than in the aisle. Formed rounded edges, tubular cross rails and adjustable feet create a compact 1200 mm-long freestanding bench intended for seated changing rather than use as a room boundary.
Key Features
The perforated top minimizes uninterrupted horizontal area and permits downward room airflow through the seat.
One lower shelf stores footwear within the bench footprint while leaving both sides open for quick visual checks.
Rounded formed edges and smooth tubular bracing avoid sharp corners around hands, garments and cleaning wipes.
Customer Product Concerns
Personnel need a stable sitting position and reachable footwear storage without blocking airflow or leaving shoes loose in the access aisle.
Balancing on one foot while fitting clean shoes increases fall risk and slows entry.The 450 mm-high perforated seat provides stable support through the complete footwear change.
Removed footwear is left in the aisle or beneath unrelated furniture.A dedicated lower shelf keeps the current user's pair directly below the sitting position.
A broad solid seat forms a concealed horizontal surface above stored shoes.Regular perforations admit light and airflow and make the storage shelf visible from above.
Uneven flooring makes a narrow bench rock when personnel sit near one end.Four threaded feet are adjusted independently before the bench enters service.
Typical Applications
Seated cleanroom shoe changesOvershoe donning stationsLaboratory personnel change roomsFood and beverage hygiene entrancesMedical-device gowning support areas
Technical Parameters
Typical configurable specifications for a perforated stainless shoe changing bench are listed below.
| Core Material | Type 304 stainless perforated seat, tubular support frame, one open lower shoe shelf and four threaded leveling feet |
|---|---|
| Panel Thickness | 1.5 mm perforated seat and lower shelf panels |
| Effective Width | 1200 mm usable seat length |
| Maximum Length | 450 mm maximum overall bench height |
| Steel Facing Thickness | 1.5 mm Type 304 stainless formed panels and tubular walls |
| Core Density | 7900–8000 kg/m³ for Type 304 stainless steel |
| Thermal Conductivity | 14–17 W/(m·K) for Type 304 stainless steel |
| Surface Finish | Electropolished Type 304 perforated seat, open shelf and tubular frame with rounded exposed edges |
| Joint Type | Fully welded seat frame with fixed perforated lower shelf and threaded covered leveling feet |
| Customization | Available based on the intended application and operating environment. |
Available Options
Solid seat topTwo lower footwear shelvesFixed floor-mount platesBlue polypropylene shelf dividers
Planning a Shoe Changing Bench specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
