Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Personnel and Material Decontamination Equipment / Personnel Decontamination Shower
Personnel and Material Decontamination Equipment

Personnel Decontamination Shower

A walk-through wash chamber for complete personnel rinsing between a controlled work area and a changing room.
  • Full-Body Wash Coverage
  • Thermostatic Water Control
  • Privacy-Safe Door Logic
  • Raised Drain Grate
Request a Quote Browse Products

Product Introduction

The personnel decontamination shower provides an enclosed wash stage rather than only a garment wet-down. Overhead, side and hand-held outlets support practical cleaning of body or protective clothing, while a thermostatic valve stabilises the water supply. The drain pan remains below a removable anti-slip grate, and door logic maintains privacy while retaining emergency-release access.

Key Features

Overhead, side and hand shower outlets address difficult-to-reach areas.

A thermostatic mixing valve moderates normal supply temperature variation.

Privacy mode keeps both doors secured during the wash stage.

A raised removable grate separates footwear from drained runoff.

Wall controls and emergency release remain accessible inside the chamber.

Customer Product Concerns

A personnel wash stage must combine coverage, comfortable water control, privacy and reliable drainage.

An overhead head does not wash boots, folds or the back of the legs.Side sprays and a flexible hand shower supplement the overhead outlet.
Supply changes make water uncomfortably hot or cold.A thermostatic valve stabilises outlet temperature.
Standard airlock timing conflicts with privacy during washing.A privacy sequence secures both doors while keeping emergency exit available.
Pool water contaminates footwear at the end of a wash.A graded pan drains below a removable raised grate.

Typical Applications

Containment laboratory exitsPharmaceutical de-gowning suitesToxic-dust hygiene stationsAnimal-research support rooms

Technical Parameters

Representative hygienic construction ranges for a personnel decontamination shower are listed below.

Core MaterialPIR-insulated SUS 304 or SUS 316L chamber with thermostatic water set, shower outlets and trapped drain
Panel Thickness75-100 mm insulated privacy enclosure panels
Effective Width1000-1500 mm clear internal width
Maximum LengthUp to 2500 mm walk-through length
Steel Facing Thickness1.2-1.5 mm stainless-steel internal facing
Core Density40-45 kg/m³ rigid PIR insulation
Thermal Conductivity0.021-0.026 W/(m·K) for the insulated panel core
Surface FinishBrushed stainless steel with coved corners, non-slip grate and cleanable fittings
Joint TypeLiquid-tight flush seams with compression-gasketed privacy doors and sanitary water connections
CustomizationAvailable based on the intended application and operating environment.

Available Options

Tempered-water recirculationBench and garment hooksEmergency drench pull handleLow-threshold access configuration

Planning a Personnel Decontamination Shower specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Email Us WhatsApp WeChat

Home

Products

News

About Us

Contact Us