EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Cleaning, Disinfection and Sterilization
Mobile UV Disinfection Trolley
A wheeled direct-irradiation UV-C trolley for timed treatment of exposed surfaces in unoccupied professional rooms, with lockable controls and integrated safety warnings.
- Mobile 360-degree positioning for flexible room coverage
- Timed UV-C exposure with remote start and warning functions
- Protective lamp arms and cleanable stainless-steel base
Product Introduction
This mobile UV disinfection trolley is intended for professional surface-treatment cycles after normal cleaning. Four swivel castors allow convenient repositioning, while one- or two-arm configurations distribute UV-C around the room. The stainless-steel base contains the timer, ballast, key control, alarms, and power connection. It is not a general lighting device and is operated only under a documented UV-C safety procedure.
Key Features
Stainless-steel mobile base with four swivel castors
Key switch and programmable exposure timer
Delayed start, buzzer, and visible status indication
Remote-control and presence-sensor options
Protective lamp guards and transport handles
Individually serviceable lamps and control gear
Compact footprint for storage and room-to-room movement
Customer Product Concerns
Direct UV-C is line-of-sight and hazardous to eyes and skin. Effective operation therefore depends on controlled placement, removal of occupants, shadow management, defined exposure time, and safeguards against unintended entry.
How is accidental exposure reduced?Keyed access, delayed start, audible warnings, remote activation, and optional presence detection support a controlled unoccupied-room cycle.
How are shadows addressed?The trolley can be repositioned for a second exposure and lamps can be oriented to suit the room geometry.
How is exposure time selected?Cycle duration is calculated from lamp output, distance, target dose, surface orientation, and verified application data.
Is movement between rooms practical?Four swivel castors, a compact base, protected tubes, and transport handles simplify relocation and storage.
Typical Applications
Cleanroom support and changing roomsLaboratories and inspection roomsClinics and treatment spaces between occupanciesFood and beverage hygiene areasOffices, classrooms, and hospitality roomsTransport-interior maintenance areas
Technical Parameters
The trolley supports germicidal lamps on vertical protective arms above a stable wheeled control base. A timer, key switch, delayed start, audible warning, and optional presence sensor help enforce unoccupied-room operation. Irradiance and exposure time are established for the target surface distance and layout.
| Core Material | Stainless-steel trolley base with aluminum lamp supports and UV-resistant components |
|---|---|
| Panel Thickness | 15–30 mm reinforced control-base sections |
| Effective Width | 450–650 mm base width |
| Maximum Length | 1200–1800 mm overall operating height |
| Steel Facing Thickness | 0.8–1.2 mm stainless-steel facing |
| Core Density | 35–45 kg/m³ internal acoustic insulation where fitted |
| Thermal Conductivity | 0.030–0.040 W/(m·K) for optional internal insulation |
| Surface Finish | Brushed stainless steel with polished lamp reflectors and cleanable controls |
| Joint Type | Bolted lamp-arm connection with sealed control housing and guarded tube sockets |
| Customization | Available based on the intended application and operating environment. |
Available Options
Single-arm or dual-arm lamp configurationRemote control and occupancy sensorProgrammable timer and cycle counterFoldable or fixed lamp armsProtective transport coverAlternative power supplies and plug standardsReplacement lamp and maintenance kit
Planning a Mobile UV Disinfection Trolley specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
