EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Industry-Specific Cleanroom Equipment
High-Pressure Cleaning Station
A mobile stainless washdown unit that supplies a controlled high-pressure water jet for removing tenacious soil from production equipment and floors.
- Industrial Triplex Pump
- Mobile Stainless Enclosure
- Integrated Hose Reel
- Pressure-Controlled Washdown
Product Introduction
The high-pressure cleaning station combines an industrial pump, inlet protection and pressure controls inside a washable stainless mobile enclosure. A reinforced hose reel and trigger lance provide practical reach around production machinery, while large wheels allow the unit to move between sanitation zones. The enclosed layout shields the motor and pump from routine splash yet keeps service panels accessible.
Key Features
The stainless cover protects drive components in wet production environments.
An integrated reel stores the reinforced hose without loose coils on the floor.
Pressure regulation and a trigger lance let operators match jet action to the surface.
Customer Product Concerns
Low-pressure hoses often cannot dislodge dried residues, while improvised pressure equipment creates storage and control problems.
Adhered soil remains after ordinary hose rinsing.The pump and focused lance increase mechanical cleaning action at the target surface.
Loose high-pressure hose creates a trip and contamination hazard.The integrated reel keeps the reinforced line organized before and after use.
Motors and pumps deteriorate in wet washdown zones.A stainless splash-resistant enclosure separates drive components from routine external spray.
One pressure setting is unsuitable for every surface.The regulator and interchangeable nozzle options support controlled cleaning intensity.
Typical Applications
Food-processing equipment washdownProduction floor and drain cleaningBeverage filling-area sanitationHigh-care utility cleaning
Technical Parameters
Typical configurable construction values for a mobile high-pressure cleaning station are listed below.
| Core Material | 304 stainless-steel enclosure with brass pump head, ceramic pistons and reinforced high-pressure hose |
|---|---|
| Panel Thickness | 30-50 mm folded enclosure and frame sections |
| Effective Width | 500-750 mm mobile unit width |
| Maximum Length | Up to 1150 mm chassis and handle envelope |
| Steel Facing Thickness | 1.2-2.0 mm stainless cover and guards |
| Core Density | 7950-8050 kg/m³ for stainless-steel construction |
| Thermal Conductivity | 14-16 W/(m·K) for austenitic stainless steel |
| Surface Finish | Brushed stainless cover with black wheels, blue reinforced hose and black lance grip |
| Joint Type | Threaded high-pressure couplings with welded chassis and removable bolted service panels |
| Customization | Available based on the intended application and operating environment. |
Available Options
Cold- or hot-water configurationAlternative pressure and flow rangesChemical injectorDifferent hose lengths and nozzle patterns
Planning a High-Pressure Cleaning Station specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
