EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Garments, PPE and Consumables
ESD Gloves
Gray carbon-fiber ESD gloves with a seamless 13-gauge liner, white polyurethane palm coating and elastic knit cuff.
- Carbon-fiber knit provides a dissipative path
- White polyurethane palm coating supports clean grip
- Seamless lightweight liner for precision assembly
Product Introduction
ESD Gloves are reusable handling gloves for electrostatic-protected production areas. Conductive carbon yarn is integrated through a lightweight nylon-polyester knit to help dissipate charge when the glove is used as part of a grounded ESD control system. A thin white polyurethane coating across the palm and fingers adds grip and abrasion resistance while the ventilated back remains flexible.
Key Features
Thin polyurethane palm coating retains tactile control
Seamless construction reduces pressure points around the fingers
Ventilated knit back improves comfort during repetitive assembly
Elastic color-coded cuff helps identify size and retain the glove
Customer Product Concerns
Handling static-sensitive parts requires both electrical continuity and precise grip. A bulky coating, broken conductive path or loose cuff can reduce control and undermine the ESD program.
Charge may accumulate if the glove does not contact the wearer consistently.Use a conductive carbon-knit liner within a verified grounded ESD system.
Heavy coatings can obscure tactile feedback on small components.Apply a thin polyurethane coating only to the working palm and fingers.
Loose fibers or worn coating may contaminate the work surface.Inspect the knit and coating routinely and replace damaged pairs.
Similar sizes can be mixed at shared workstations.Select color-coded elastic cuffs for rapid size identification.
Typical Applications
Used for PCB assembly, semiconductor packaging, SMT lines, precision electronics, optical component handling, device inspection and maintenance inside electrostatic-protected areas.
Technical Parameters
These specifications describe common reusable carbon-fiber ESD assembly gloves. Electrical performance depends on the complete person–garment–floor grounding system and should be verified in use.
| Core Material | 13-gauge nylon-polyester knit with conductive carbon filament |
|---|---|
| Panel Thickness | 0.80–1.20 mm knitted liner and coating |
| Effective Width | 85–115 mm palm width by size |
| Maximum Length | 250 mm |
| Steel Facing Thickness | 0 mm; no steel facing used |
| Core Density | 110–180 kg/m³ bulk knitted structure |
| Thermal Conductivity | 0.05–0.10 W/(m·K), knit and coating dependent |
| Surface Finish | Gray conductive knit with white polyurethane palm coating |
| Joint Type | Seamless knitted full-finger glove with elastic rib cuff |
| Customization | Available based on the intended application and operating environment. |
Available Options
Palm-coated or fingertip-coated polyurethaneWhite, gray or black conductive knitSizes XS through 2XL13-gauge or finer lightweight linerColor-coded cuff edgeClean-packed pairs for controlled areas
Planning a ESD Gloves specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
