Cleanroom Drainage, Hygiene and Safety Equipment

Emergency Safety Shower

A plumbed overhead drench shower with a stay-open pull valve for rapid whole-body flushing after chemical exposure.

Broad Drench Spray Pattern
Single-Pull Stay-Open Valve
High-Visibility Safety Components
Stainless Configuration Available

Request a Quote Browse Products

Product Introduction

The emergency safety shower combines a corrosion-resistant vertical riser, hydrodynamic shower head and large pull rod with a stay-open valve. One downward pull establishes continuous flow so the user can remove contaminated clothing and remain under the spray. Ceiling, wall and free-standing configurations are available, with optional flow alarms and tempered-water equipment for facilities requiring monitored emergency service.

Key Features

A broad shower head distributes flushing water across the body.

The stay-open valve remains active without continuous force on the pull rod.

High-visibility controls and signage help users find the station quickly.

Service unions and replaceable valve components simplify inspection and maintenance.

Customer Product Concerns

Whole-body exposure requires immediate sustained flushing from an obvious station that remains operable while the user moves freely.

A small spray pattern leaves parts of the body outside the flushing envelope.The engineered shower head produces a broad distributed drench pattern.

An injured user cannot keep holding a control throughout flushing.A single pull opens a stay-open valve until it is intentionally reset.

Corrosive atmospheres degrade ordinary painted pipework.Optional 304 or 316L stainless pipe, valve and head components resist aggressive cleaning and moisture.

Facilities cannot tell when a remote shower is activated.An optional flow switch provides local beacon and building-alarm contacts.

Typical Applications

Chemical preparation roomsProcess utility spacesLaboratory service corridorsBattery and gas handling areas

Technical Parameters

Typical materials and envelope values for a free-standing plumbed safety shower are listed below; emergency water flow and temperature follow the facility design.

Core Material	Galvanized steel or 304/316L stainless pipe, valve and shower head
Panel Thickness	2.0-3.0 mm pipe wall depending on diameter
Effective Width	250-350 mm shower head diameter
Maximum Length	Up to 2500 mm overall installed height
Steel Facing Thickness	1.2-2.0 mm stainless shower head and signage plate
Core Density	7850-8000 kg/m³ for steel structural parts
Thermal Conductivity	14-60 W/(m·K) according to stainless or galvanized steel selection
Surface Finish	Safety-green coating or satin stainless finish
Joint Type	Threaded or flanged riser with stay-open ball valve and pull-rod linkage
Customization	Available based on the intended application and operating environment.

Available Options

All-stainless constructionWall or free-standing mountFlow-switch alarmTempered-water supply package

Planning a Emergency Safety Shower specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team