Cleanroom Drainage, Hygiene and Safety Equipment

Combination Eyewash and Safety Shower

A single plumbed station providing independently activated twin-nozzle eyewash and whole-body emergency drench shower.

Eye and Body Flushing
Independent Stay-Open Controls
Protected Twin Nozzles
Visible Integrated Station

Request a Quote Browse Products

Product Introduction

The combination unit mounts an emergency eyewash receptor and overhead drench shower on one supply frame. The eyewash push flag and shower pull rod operate separate stay-open valves, allowing either function or both to run as the incident requires. Common inlet piping reduces installation complexity, while individual flow controls and optional alarm switches preserve functional monitoring.

Key Features

One station serves eye, face and whole-body exposure response.

Independent controls prevent one function from delaying the other.

Covered eyewash heads and a broad shower head provide controlled flushing patterns.

A rigid corrosion-resistant frame keeps activation points in fixed visible positions.

Customer Product Concerns

Chemical areas may require eye-only or full-body response, yet emergency equipment must remain simple to identify and operate under stress.

Separate eyewash and shower locations force users to choose between distant stations.Both flushing functions share one clearly identified frame and service point.

Activating the shower should not prevent simultaneous eye flushing.Independent stay-open valves allow both functions to operate together.

Shared supply pressure can destabilize discharge when both functions run.The inlet and branch sizes are selected for simultaneous design flow with dedicated flow controls.

Remote safety staff need activation awareness.Optional branch flow switches provide separate or common alarm outputs.

Typical Applications

Chemical dispensing roomsPharmaceutical process utilitiesLaboratory support areasHazardous material storage

Technical Parameters

Typical construction values for a free-standing combination station are shown below; simultaneous flow demand and tempered water are coordinated with the emergency-water system.

Core Material	Galvanized steel or 304/316L stainless frame with stainless eyewash receptor
Panel Thickness	2.0-3.0 mm riser pipe wall
Effective Width	700-900 mm complete station envelope
Maximum Length	Up to 2500 mm overall height
Steel Facing Thickness	1.0-2.0 mm stainless receptor and signage surfaces
Core Density	7850-8000 kg/m³ for steel structural parts
Thermal Conductivity	14-60 W/(m·K) according to steel grade
Surface Finish	Safety-green coating or satin stainless with colored controls
Joint Type	Threaded or flanged common inlet with independent stay-open branch valves
Customization	Available based on the intended application and operating environment.

Available Options

All-stainless frameEye/face wash receptorActivation alarm switchesTempered-water package

Planning a Combination Eyewash and Safety Shower specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team