EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Garments, PPE and Consumables
Cleanroom Wiping Paper
Light-blue cellulose/polyester cleanroom wiping paper engineered for low-lint documentation, surface blotting and light-duty cleaning in controlled areas.
- Smooth lint-controlled sheet for documentation and light-duty wiping
- Light-blue color supports visual separation from ordinary office paper
- Crisp clean-cut edges and good wet strength aid controlled handling
Product Introduction
Cleanroom Wiping Paper is a thin, nonwoven paper-like sheet made from refined cellulose reinforced with polyester fibers. The smooth low-lint face is suitable for recording, interleaving, blotting and light wipe-down tasks where ordinary paper can release fibers. Blue identification makes segregation from conventional stationery easy, while clean-cut edges and controlled packaging protect the sheets before use.
Key Features
Smooth low-lint surface releases fewer loose fibers than office paper
Light-blue identification assists controlled-area segregation
Thin flexible sheets conform to flat panels and instrument surfaces
Multiple sheet sizes and cleanroom packaging levels are available
Customer Product Concerns
Ordinary paper can shed fibers, generate dust and lose strength when damp. Controlled areas need a paper-like material that handles familiar tasks without becoming an avoidable contamination source.
Conventional paper may lint during writing or wiping.Use a lint-controlled nonwoven cellulose/polyester construction.
A highly absorbent sheet may break apart after solvent contact.Select a reinforced grade with sufficient wet tensile strength.
Uncontrolled storage can expose the stack to dust before use.Supply sheets in sealed inner bags sized for the consumption rate.
White sheets may be mixed inadvertently with general-office stock.Choose light-blue stock for immediate controlled-area identification.
Typical Applications
Suitable for cleanroom documentation, line clearance notes, interleaving, spill blotting, instrument wiping and light removal of aqueous residue in electronics, pharmaceutical, optical and medical-device production.
Technical Parameters
The following ranges describe common cleanroom wiping-paper formats. Final basis weight, fiber blend, size and packaging are chosen for the required balance of absorbency, writing behavior and particulate control.
| Core Material | Refined cellulose reinforced with polyester fibers |
|---|---|
| Panel Thickness | 0.08–0.18 mm |
| Effective Width | 100–300 mm |
| Maximum Length | 400 mm |
| Steel Facing Thickness | 0 mm; no steel facing used |
| Core Density | 500–850 kg/m³ apparent sheet density |
| Thermal Conductivity | 0.05–0.09 W/(m·K), sheet dependent |
| Surface Finish | Smooth light-blue low-lint paper-like face |
| Joint Type | Crisp clean-cut sheet perimeter |
| Customization | Available based on the intended application and operating environment. |
Available Options
Light-blue or white sheet colorSeveral basis weightsSquare, A4 and custom-cut formatsFlat stacks or interfolded supplyCleanroom double-bag packagingDry or application-compatible pre-wetted format
Planning a Cleanroom Wiping Paper specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
