EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Cleaning, Disinfection and Sterilization
Cleanroom Ultrasonic Cleaner
A floor-standing stainless-steel ultrasonic cleaning tank for controlled removal of fine residues from reusable cleanroom components and precision parts.
- High-frequency cavitation reaches recesses and complex surfaces
- Drainable stainless tank supports controlled aqueous cleaning
- Digital time, temperature, and ultrasonic mode settings
Product Introduction
This cleanroom ultrasonic cleaner is a mobile, enclosed single-tank system for precision aqueous cleaning. Its cavitation-resistant stainless tank, lidded basket, digital controls, heater, and drainable hygienic cabinet provide a repeatable alternative to manual scrubbing. Frequency, chemistry, temperature, and exposure are selected for the actual part material and contamination.
Key Features
Sweep mode for more uniform ultrasonic distribution
Adjustable timer and thermostatic bath heating
Removable stainless mesh parts basket
Hinged lid to reduce noise and vapor release
Front-mounted digital operator panel
Sloped drain with sanitary outlet valve
Lockable castors for cleaning and service access
Customer Product Concerns
Brushes and spray jets may not reach blind holes, fine meshes, or closely spaced features. Uncontrolled bath loading, temperature, and exposure time can also produce inconsistent cleaning or damage sensitive surfaces.
Will cleaning reach complex features?Ultrasonic cavitation acts throughout the immersed bath, while sweep control reduces concentrated nodes and improves coverage around recesses.
How are delicate components protected?Adjustable exposure, selectable frequency where specified, controlled heating, and a suspended basket allow the process to be matched to the material.
Can spent solution be removed cleanly?A sloped tank floor and low-point sanitary drain support complete discharge and routine tank wiping.
How is repeatability improved?Digital time and temperature settings, defined basket loading, and documented chemistry concentration provide controllable process inputs.
Typical Applications
Precision cleanroom tool cleaningPharmaceutical change-part processingMedical-device component preparationLaboratory glass and metal partsFine filters, screens, and nozzlesElectronics and optical component support
Technical Parameters
Bonded ultrasonic transducers energize a heated stainless-steel bath, producing cavitation throughout the working volume. A removable basket keeps components clear of the tank base, while sweep-frequency control improves sound-field distribution and a front drain simplifies solution changes.
| Core Material | 304 stainless-steel cabinet with 316L stainless-steel ultrasonic tank |
|---|---|
| Panel Thickness | 20–40 mm insulated cabinet sections |
| Effective Width | 300–600 mm usable tank width |
| Maximum Length | 800–1500 mm overall equipment length |
| Steel Facing Thickness | 1.0–2.0 mm stainless-steel facing |
| Core Density | 40–60 kg/m³ acoustic and thermal insulation where fitted |
| Thermal Conductivity | 0.035–0.045 W/(m·K) for insulated cabinet sections |
| Surface Finish | Brushed external stainless steel with smooth pickled and passivated tank |
| Joint Type | Continuously welded tank seams with gasketed lid and sanitary drain connection |
| Customization | Available based on the intended application and operating environment. |
Available Options
25/40 kHz or 40/80 kHz frequency configurationsLift-out or oscillating parts basketFiltration and oil-skimming loopRinse tank and hot-air drying moduleNoise-reduction lidPurified-water inlet316L full constructionData logging and recipe control
Planning a Cleanroom Ultrasonic Cleaner specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
