EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Garments, PPE and Consumables
Cleanroom Nitrile Gloves
Powder-free white nitrile cleanroom gloves with an extended cuff, textured fingertips and ambidextrous sizing.
- Powder-free white nitrile construction
- Extended beaded cuff for garment overlap
- Textured fingertips for controlled handling
Product Introduction
Cleanroom Nitrile Gloves provide latex-free hand coverage for controlled handling, assembly and preparation work. The white nitrile film is chlorinated for easier donning without powder, while textured fingertips support grip on smooth components. A 300 or 400 mm beaded cuff extends beneath the garment sleeve and helps resist rolling during movement.
Key Features
Powder-free chlorinated inner surface supports clean donning
Textured fingertips improve control without a heavily textured palm
Extended cuff increases overlap with cleanroom garments
White color supports visible contamination checks
Customer Product Concerns
Cleanroom gloves must balance dexterity, cuff retention and controlled particle levels. Incorrect sizing or insufficient overlap can cause fatigue, tearing or exposed wrist areas.
The cuff may roll down beneath the garment sleeve.Select a beaded 300 or 400 mm cuff with adequate sleeve overlap.
Smooth fingertips can reduce control of polished parts.Use textured fingertips for localized grip performance.
An overly thick glove can reduce fine tactile feedback.Choose a balanced palm thickness appropriate to the task and wear time.
Powder or excess residues may transfer to sensitive surfaces.Specify powder-free cleanroom processing and double-bag packaging.
Typical Applications
Used for semiconductor and electronics handling, pharmaceutical preparation, biotechnology laboratories, medical-device assembly, optics, clean packing and controlled cleaning.
Technical Parameters
These values describe non-sterile disposable nitrile cleanroom gloves. Chemical suitability and cleanliness level must be confirmed for the actual process.
| Core Material | Accelerator-controlled powder-free nitrile rubber |
|---|---|
| Panel Thickness | 0.12–0.17 mm palm |
| Effective Width | 80–125 mm palm width by size |
| Maximum Length | 400 mm |
| Steel Facing Thickness | 0 mm; no steel facing used |
| Core Density | 950–1050 kg/m³ nitrile elastomer |
| Thermal Conductivity | 0.14–0.20 W/(m·K), formulation dependent |
| Surface Finish | White chlorinated inner surface with textured fingertips |
| Joint Type | Seamless ambidextrous glove with rolled beaded cuff |
| Customization | Available based on the intended application and operating environment. |
Available Options
300 mm or 400 mm cuff lengthWhite, blue or other process colorAmbidextrous or hand-specific formSmooth or textured fingertipsAlternative palm thicknessDouble-bagged cleanroom-compatible packaging
Planning a Cleanroom Nitrile Gloves specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
