EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Cleaning, Disinfection and Sterilization
Cleanroom Mop System
Low-shedding flat cleanroom mop system with autoclavable frame, adjustable handle and interchangeable polyester or microfiber covers.
- Low-shedding sealed-edge covers
- Articulated low-profile frame
- Adjustable lightweight handle
Product Introduction
The Cleanroom Mop System pairs a lightweight stainless-steel or autoclavable polymer frame with a telescopic handle and application-specific covers. A low-profile articulated joint keeps the pad flat through corners and beneath equipment. Laundered polyester, microfiber and foam-laminate covers provide choices for disinfectant application, residue removal or dry wiping. Sealed edges and secure attachment limit fiber release and simplify replacement while gloved.
Key Features
Low-lint polyester and microfiber cover choices.
Telescopic lightweight handle reduces operator strain.
Secure cover attachment supports gloved changeover.
Chemical-resistant and sterilizable hardware options.
Suitable for floors, walls and ceilings.
Customer Product Concerns
The system addresses fiber control, corner contact, operator fatigue and chemical compatibility.
Fiber sheddingCleanroom-laundered sealed-edge covers use low-lint synthetic substrates.
Poor corner contactThe articulated low-profile frame maintains broad surface contact.
Operator fatigueA lightweight adjustable handle supports neutral working posture.
Chemical incompatibilityMultiple cover materials can be matched to the cleaning agent and soil.
Typical Applications
Cleanroom floor cleaning and disinfectionWall and ceiling wipingResidue removal after sporicidal treatmentPharmaceutical and medical-device sanitationElectronics and laboratory controlled areas
Technical Parameters
The following dimensions cover common flat-mop configurations for floors, walls and ceilings.
| Core Material | Stainless-steel frame with polyester microfiber cover |
|---|---|
| Panel Thickness | 2.0 mm nominal frame plate thickness |
| Effective Width | 280–400 mm mop working width |
| Maximum Length | 1800 mm extended handle length |
| Steel Facing Thickness | 1.2 mm nominal handle tube wall |
| Core Density | 7900 kg/m³ nominal stainless-steel density |
| Thermal Conductivity | 15 W/(m·K) nominal for stainless-steel hardware |
| Surface Finish | Electropolished stainless steel with sealed-edge white cover |
| Joint Type | Hinged swivel frame with clip, pocket or hook-and-loop cover attachment |
| Customization | Available based on the intended application and operating environment. |
Available Options
Stainless-steel, polymer or carbon-fiber handlePolyester, microfiber or foam-laminate coversSterile single-use or reusable laundered covers280, 350 and 400 mm framesBucketless solution-dosing handle
Planning a Cleanroom Mop System specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
