EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Cleaning, Disinfection and Sterilization
Cleanroom Floor Scrubber
Compact walk-behind floor scrubber with cleanable solution tanks, low-shedding components and controlled water recovery for routine cleanroom floor care.
- One-pass scrubbing and recovery
- Cleanable removable tanks
- Compact battery-powered chassis
Product Introduction
The Cleanroom Floor Scrubber applies cleaning solution, mechanically agitates the floor and recovers wastewater in one pass. Its compact walk-behind chassis is sized for corridors and production rooms, with smooth polyethylene tanks, stainless hardware and non-marking wheels. A disk or orbital head provides consistent contact, while a trailing squeegee and vacuum motor leave the surface substantially dry. Adjustable solution flow and brush pressure help operators match the process to resilient flooring and contamination load.
Key Features
Compact turning radius for aisles and controlled-area corridors.
Smooth removable tanks support cleaning and inspection.
Non-marking wheels and low-shedding squeegee blades.
Adjustable brush pressure and solution delivery.
Battery power avoids trailing cables in active production areas.
Customer Product Concerns
The machine addresses residual water, cross-zone hygiene, floor marking and restricted aisle access.
Residual dirty waterA full-width trailing squeegee and dedicated recovery vacuum collect wash solution immediately.
Machine particles or marksNon-marking tires, cleanable tanks and selected low-shedding components suit controlled interiors.
Cross-contamination between zonesRemovable tanks, color-coded brushes and dedicated-area configurations support segregation.
Restricted aisle accessA compact walk-behind chassis and folding handle improve maneuverability and storage.
Typical Applications
Pharmaceutical cleanroom corridors and production roomsMedical-device and electronics controlled areasClean packaging and gowning zonesResilient vinyl, epoxy and coated floorsRoutine maintenance cleaning after production shifts
Technical Parameters
The following configuration suits controlled-area resilient and coated floor maintenance.
| Core Material | Rotomolded polyethylene tanks with stainless-steel hardware |
|---|---|
| Panel Thickness | 4–6 mm nominal tank-wall thickness |
| Effective Width | 430–510 mm scrubbing width |
| Maximum Length | 1200 mm nominal machine length |
| Steel Facing Thickness | 1.5 mm nominal stainless-steel bracket thickness |
| Core Density | 950 kg/m³ nominal polyethylene density |
| Thermal Conductivity | 0.42 W/(m·K) nominal for polyethylene tank material |
| Surface Finish | Smooth white polyethylene with brushed stainless hardware |
| Joint Type | Gasketed removable tanks with quick-connect solution lines |
| Customization | Available based on the intended application and operating environment. |
Available Options
Disk or orbital scrubbing headDifferent pad grades and brush materialsLithium or maintenance-free battery packageHEPA-filtered recovery-air exhaust optionSqueegee-blade and tank color coding
Planning a Cleanroom Floor Scrubber specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
