EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Drainage, Hygiene and Safety Equipment
Cleanroom Fire Extinguisher
A portable extinguisher package with a smooth corrosion-resistant cylinder and cleanable wall or recessed mounting.
- Smooth Cleanable Cylinder
- Corrosion-Resistant Hardware
- Wall or Recessed Mounting
- Hazard-Specific Extinguishing Medium
Product Introduction
The cleanroom extinguisher combines an appropriate portable extinguishing medium with a smooth cylinder, pressure indication and controlled mounting arrangement. Stainless or high-durability coated cylinders resist frequent wipe-down, while a compact bracket or recessed cabinet keeps the unit visible without adding unnecessary ledges. Medium and rating are selected for the actual fire hazards in the protected area.
Key Features
A visible pressure indicator supports inspection where applicable.
Retained wall brackets prevent movement while allowing rapid removal.
Recessed cabinet options reduce corridor projection.
Customer Product Concerns
Portable fire response equipment must remain obvious and accessible without introducing corroding hardware or awkward dirt-catching mounts.
Painted cylinders can chip under frequent chemical wipe-down.Stainless or chemically resistant coated cylinder options improve surface durability.
A projecting extinguisher obstructs narrow clean corridors.A recessed or semi-recessed cabinet reduces the installed projection.
The wrong medium can damage equipment or fail on the relevant hazard.Agent type and rating are matched to electrical, liquid or ordinary-combustible risks.
Loose brackets allow vibration and wall damage.A retained cleanable bracket secures the cylinder while keeping the release action simple.
Typical Applications
Cleanroom corridorsLaboratory support zonesElectrical and utility roomsControlled manufacturing areas
Technical Parameters
Typical physical construction values for a portable cleanroom extinguisher package are shown below; capacity and extinguishing medium follow the hazard assessment.
| Core Material | Stainless or coated steel pressure cylinder with brass valve assembly |
|---|---|
| Panel Thickness | 1.5-3.0 mm pressure-cylinder wall depending on capacity |
| Effective Width | 120-220 mm cylinder diameter |
| Maximum Length | Up to 800 mm overall cylinder height |
| Steel Facing Thickness | 1.0-1.5 mm optional stainless cabinet or bracket surfaces |
| Core Density | 7850-8000 kg/m³ for steel and stainless parts |
| Thermal Conductivity | 14-60 W/(m·K) according to cylinder material |
| Surface Finish | Satin stainless or smooth high-durability protective coating |
| Joint Type | Threaded valve neck with retained wall bracket or recessed cabinet mounting |
| Customization | Available based on the intended application and operating environment. |
Available Options
Stainless cylinderClean-agent or carbon-dioxide mediumWall bracketRecessed stainless cabinet
Planning a Cleanroom Fire Extinguisher specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
