Cleanroom Doors, Windows and Interlock Systems

Cleanroom Emergency Exit Door

An outward-opening hygienic door that combines smooth cleanroom surfaces with intuitive panic-release hardware for a clearly defined escape route.

Clean Corridor Egress
Single or Double Leaf
GRP or Stainless Finish
800-1800 mm Clear Opening

Request a Quote Browse Products

Product Introduction

The Cleanroom Emergency Exit Door uses a flush composite or metal-faced leaf, sealed perimeter frame and outward-opening egress hardware. A horizontal panic device releases the latch with a single push, while the clean-side arrangement minimizes ledges and exposed fixings. The door can incorporate controlled closing, access monitoring and a flush observation panel without compromising the direct escape function.

Key Features

Full-width panic hardware provides an obvious single-action release from the protected side.

Outward swing preserves the escape direction and clear passage during evacuation.

Flush door faces and sealed edges support regular controlled-area cleaning.

Self-closing hardware restores room separation after normal authorized use.

Monitored latch and door-position options connect the exit to the facility alarm system.

Customer Product Concerns

Complex locks delay escape when personnel are under stress.A full-width panic bar releases the latch through one intuitive push action.

Conventional panic hardware contains crevices that are difficult to clean.Cleanable hardware finishes and a flush sealed leaf reduce exposed dirt traps.

An exit left ajar can disrupt pressure control during daily operation.Controlled self-closing action returns the leaf to its gasketed frame.

Security staff cannot distinguish an authorized opening from an emergency event.Door-position and latch monitoring provide a clear status signal to the access system.

Typical Applications

Pharmaceutical production escape routesLaboratory clean corridorsMedical-device manufacturingControlled food-processing roomsClean warehouse emergency exits

Technical Parameters

Core Material	Rigid polyurethane foam, aluminum honeycomb or mineral fibre within a sealed hygienic leaf
Panel Thickness	40–60 mm
Effective Width	800–1800 mm clear opening, single or double leaf
Maximum Length	Up to 2700 mm leaf height
Steel Facing Thickness	0.8–1.2 mm coated or stainless-steel facing where metal skins are selected
Core Density	40–60 kg/m³ for rigid polyurethane foam or 80–140 kg/m³ for mineral-fibre core
Thermal Conductivity	0.024–0.045 W/(m·K), depending on the selected core
Surface Finish	Smooth hygienic GRP, powder-coated steel or brushed stainless steel
Joint Type	Outward-swinging sealed leaf with panic exit device, self-closing hinges or closer and rebated frame
Customization	Available based on the intended application and operating environment.

Available Options

Single or double leafCleanable stainless panic barFlush vision panelDoor-position and alarm contacts

Planning a Cleanroom Emergency Exit Door specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team