Complete hollow MgO cleanroom sandwich panel with steel facings

클린룸 벽 및 천장 시스템

Hollow MgO 클린룸 샌드위치 패널

A cleanroom sandwich panel built around a profiled hollow magnesium oxide core, reducing solid material mass while retaining firm inorganic webs that support flat steel facings and convenient internal service routing.

Profiled Hollow MgO Core
Integrated Service Cavities
Firm Inorganic Webs
Protected Four-Side Frame

견적 요청 제품 찾아보기

상품 소개

Hollow MgO Cleanroom Panels use molded magnesium oxide profiles rather than a fully solid core. Internal ribs support the outer metal skins, while continuous cavities reduce weight and can accommodate carefully routed low-voltage services. The hard inorganic webs create useful bearing zones around the panel perimeter and at prepared openings. Steel facings close the core from the controlled room, and framed edges protect the hollow geometry during cutting and installation. This construction is particularly useful for ceiling modules and service-integrated partitions.

주요 기능

Hollow channels reduce material mass compared with a solid magnesium core.

Internal MgO ribs transfer surface pressure between the two metal faces.

Selected cavities can carry pre-planned conduits without exposing services in the clean area.

Four-sided framing closes the hollow ends and protects the core profile.

Factory-prepared openings preserve rib continuity around lights, outlets and inspection points.

고객 제품 관심사

The main concerns are unsupported cut-outs, concealed-service access, edge damage and local point loading.

Random site cutting can sever internal ribs and weaken the panel around an opening.Factory-planned cut-outs retain supporting webs and add perimeter reinforcement where needed.

Loose cables inside an inaccessible cavity are difficult to inspect later.Defined conduit routes and labeled access points keep concealed services orderly and traceable.

Open hollow ends can trap debris or expose the internal structure.Closed edge frames seal every perimeter and provide clean interfaces to adjacent modules.

Concentrated ceiling loads can fall between the core ribs.Local inserts transfer fixtures to reinforced zones instead of relying on an unsupported cavity.

일반적인 응용 프로그램

Service-integrated cleanroom partitionsLighting and utility ceiling modulesLaboratory wall systemsElectronics manufacturing roomsMedical clean corridors

기술 매개변수

The common manufacturing range for hollow MgO cleanroom panels is listed below.

핵심 재료	Profiled hollow magnesium oxide composite
패널 두께	50, 75, 100 또는 150 mm
유효 폭	950, 980 or 1150 mm
최대 길이	6000 mm
강철 면면 두께	0.40–0.80 mm
코어 밀도	900–1200 kg/m³ for the MgO rib material
열전도도 (Thermal Conductivity)	0.070–0.090 W/(m·K) for the hollow core assembly
표면 마무리	PE, HDP 또는 PVDF 코팅 아연금 강철
접합 유형	Four-sided framed tongue-and-groove or center-aluminum joint
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Internal conduit routingCeiling fixture reinforcementAlternative hollow rib layoutPre-cut electrical and lighting openings

Planning a Hollow MgO Cleanroom Sandwich Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.