クリーンルームの壁と天井システム

プロフィールの接続 H 型クリーンルームパネル

An extruded aluminum H-section that receives two opposing cleanroom panels and maintains a straight, protected joint along a modular wall or ceiling run.

Opposed channels for two panel edges
Straight in-plane modular connection
Compatible with multiple panel thicknesses
Sealable exposed joint boundaries

見積もりリクエスト製品案内

商品紹介

The H-Type Cleanroom Panel Connecting Profile joins two sandwich panels edge to edge in the same plane. Its opposed channels locate both panel ends, cover exposed core edges and establish a repeatable joint width. The aluminum section can be used in straight wall runs, ceiling infill and removable service bays where a defined mechanical connection is preferred over a tongue-and-groove-only joint.

主要な特徴

Twin opposed channels align neighboring panels along a common centerline.

The H-section conceals both cut edges and limits direct exposure of the panel core.

A continuous visible face creates a deliberate architectural joint.

Multiple channel sizes accommodate common cleanroom panel thicknesses.

Straight perimeter lands support controlled sealant application on both sides.

お客様の製品に関する懸念事項

An in-line panel joint must keep two large panels aligned while protecting their edges and maintaining a sealable interface.

Independent panel ends can step out of plane and create a visible ridge.Opposed channels hold both edges against one shared extruded connector.

Cut sandwich-panel cores remain exposed at butt joints.The H-shaped profile encloses both ends within dedicated receiving channels.

A freehand butt joint varies in width over the height of a wall.The fixed extrusion geometry maintains a consistent center joint from end to end.

Replacing one service panel can disturb the neighboring wall module.A defined connector profile separates the panel interfaces and supports modular removal strategies.

典型的な用途

Straight modular cleanroom wall runsCeiling panel connectionsReplaceable service-bay infill panelsControlled-environment partition extensionsConnections between compatible panel modules

技術的なパラメータ

Channel dimensions are selected to suit the connected sandwich-panel thickness. Thermal values for an insulated panel do not describe this solid aluminum joining component.

コア材料	6063-T5 extruded aluminum H-section
パネルの厚さ	50, 75, 80, 100 or 150 mm compatible variants
有効幅	50 mm typical visible joint face
最大長さ	6000 mm
鋼鉄の厚さを直面する	N/A — the connector is an aluminum extrusion
コア密度	N / A— 絶縁コアなし、アルミニウム合金密度は約 2700 kg / m3 です。
熱伝導率	N / A— 絶縁コアなし；アルミニウム合金は約 200 W / （ m · K ）
表面仕上げ	Electrostatic powder-coated or clear anodized aluminum
ジョイントタイプ	Twin opposed H-channels with sealant-ready panel interfaces
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

H-profile for 50 mm panelsH-profile for 75 or 80 mm panelsH-profile for 100 or 150 mm panelsAnodized or powder-coated exposed finish

Planning a H-Type Cleanroom Panel Connecting Profile specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する