Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum HVAC und Luftbehandlung Ausrüstung
Kompakte Luftbehandlungseinheit
A factory-assembled short-footprint air handler that integrates essential filtration, coil and fan functions for smaller controlled spaces.
- Short Equipment Footprint
- Factory-Assembled Package
- Integrated Controls
- Accessible Service Side
Produkteinführung
The compact air handling unit combines closely matched filters, coil and direct-drive fan in a monobloc or two-section casing. Component spacing is optimized to reduce overall length while maintaining coil drainage and filter removal. Integrated controls can manage fan speed, valve output, frost protection and filter alarms. The package suits smaller clean support rooms and retrofit locations where a full modular AHU would occupy excessive plant space.
Key Features
Factory-installed controls simplify fan, coil and frost-protection integration.
Direct-drive fans eliminate belt clearance and reduce maintenance inside the compact casing.
Multiple duct orientations help the unit fit above, beside or behind existing services.
Kunden Produktbedenken
Compact equipment must save space without compressing filters, drains and service points until maintenance becomes impractical.
A conventional modular AHU is longer than the available mechanical room.Close-coupled components and a direct-drive fan shorten the casing.
Filter removal collides with nearby pipework.The service side and pull direction are selected to match the actual clear zone.
Condensate is drawn off the coil because the fan is too close.A sized separation space and sloped drain pan preserve moisture control.
Field-mounted controls occupy additional wall and wiring space.A unit-mounted controller and sensors centralize the operating package.
Typische Anwendungen
Small cleanroom suitesUnterstützungsräume für LaborMedizinische Geräte InspektionsbereicheControlled storage spacesRetrofit ventilation systems
Technische Parameter
Typical construction ranges for a compact insulated air handler are listed below.
| Core Material | Closed-cell polyurethane or mineral-wool insulation in compact double-skin casing |
|---|---|
| Panel Dicke | 25–50 mm insulated panel |
| Effektive Breite | 600–1800 mm nominal casing width |
| Maximale Länge | Up to 4500 mm complete assembled length |
| Stahl facing Dicke | 0.6–0.8 mm galvanized or coated sheet skins |
| Kerndichte | 38–42 kg/m³ polyurethane or 60–85 kg/m³ mineral wool |
| Thermische Leitfähigkeit | 0.023–0.040 W/(m·K) depending on insulation |
| Oberfläche Finish | Powder-coated galvanized exterior with smooth galvanized inner surfaces |
| Gemeinsamer Typ | Gasketed monobloc or two-section casing with removable service panels |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Horizontal, vertical or top-connected casingChilled-water or DX coolingEC fan and integrated controllerPlate or rotary heat-recovery section
Planning a Compact Air Handling Unit specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
