English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
قابل للغسل الألومنيوم شبكة مرشح
A lightweight permanent filter that uses multiple layers of crimped aluminum mesh to collect coarse dust, lint and grease by impingement.
- All-Aluminum Construction
- Multi-Layer Crimped Mesh
- High-Airflow Washability
- Corrosion-Resistant Frame
مقدمة المنتج
The washable aluminum mesh filter packs alternating layers of crimped aluminum screen and expanded metal into an all-aluminum frame. Successive changes in mesh direction create a tortuous air path that brings coarse particles, lint and light oil mist into contact with the large metal surface area. Protective face grids retain the media under elevated face velocity, while drain openings prevent wash water from remaining inside the lower rail. The non-corroding lightweight construction is suited to repeated cleaning where a disposable fiber pad would be consumed quickly.
الخصائص الرئيسية
Aluminum media, face grids and frame keep the assembly lightweight and corrosion resistant.
Rigid expanded-metal retainers prevent the internal screens from shifting during washing.
Drain slots in the frame allow rinse water to leave the media pack before reinstallation.
مخاوف المنتج للعملاء
Permanent aluminum filters must balance open airflow with enough tortuous metal surface to collect contamination and survive frequent washing.
Disposable media clogs rapidly in oily or lint-heavy intake air.Layered aluminum mesh presents washable impingement surfaces that can be restored with water and suitable detergent.
A dense metal pack creates excessive fan resistance after only moderate loading.Crimped layers maintain open passages and distribute contamination through the filter depth.
Loose internal screens settle and leave an unfiltered path across the top of the frame.Expanded-metal face retainers compress and locate every media layer around the full perimeter.
Rinse water trapped in the bottom channel accelerates staining and microbial growth.Drain slots and an all-aluminum construction support complete drying before the filter returns to service.
تطبيقات نموذجية
Outdoor-air intake pre-filtrationCompressor and generator ventilationCommercial kitchen make-up airIndustrial cabinets and machinery coolingWashable AHU coarse-filter banks
المعلمات الفنية
Typical construction ranges for an all-aluminum washable mesh panel are shown below.
| المواد الأساسية | Multiple layers of crimped aluminum wire cloth and expanded aluminum mesh |
|---|---|
| سمك اللوحة | 25, 50 or 100 mm nominal depth |
| العرض الفعال | 300-610 mm standard face width |
| الحد الأقصى الطول | Up to 1220 mm with suitable internal mesh support |
| الصلب يواجه سمك | 0.50-0.80 mm aluminum expanded-metal face retainers; no steel in the standard version |
| الكثافة الأساسية | Approximately 2700 kg/m³ for the aluminum mesh alloy |
| الموصلية الحرارية | Approximately 205-235 W/(m·K) for the aluminum alloy media |
| إنهاء السطح | Mill-finish or conversion-coated natural aluminum |
| نوع المشترك | Crimped mesh layers mechanically retained between expanded-aluminum faces in a folded frame |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
25 mm single-bank or 50 mm double-bank constructionDry or light-tackified expanded-aluminum layersIntegrated handles and drain holesCustom face size and corrugated-mesh layer count
Planning a Washable Aluminum Mesh Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
