Three-quarter view of an all-aluminum washable mesh air filter

エアフィルターと化学ろ過

Washable アルミメッシュフィルター

A lightweight permanent filter that uses multiple layers of crimped aluminum mesh to collect coarse dust, lint and grease by impingement.

All-Aluminum Construction
Multi-Layer Crimped Mesh
High-Airflow Washability
Corrosion-Resistant Frame

見積もりリクエスト製品案内

商品紹介

The washable aluminum mesh filter packs alternating layers of crimped aluminum screen and expanded metal into an all-aluminum frame. Successive changes in mesh direction create a tortuous air path that brings coarse particles, lint and light oil mist into contact with the large metal surface area. Protective face grids retain the media under elevated face velocity, while drain openings prevent wash water from remaining inside the lower rail. The non-corroding lightweight construction is suited to repeated cleaning where a disposable fiber pad would be consumed quickly.

主要な特徴

Alternating crimp directions create multiple impingement surfaces without densely blocking the air path.

Aluminum media, face grids and frame keep the assembly lightweight and corrosion resistant.

Rigid expanded-metal retainers prevent the internal screens from shifting during washing.

Drain slots in the frame allow rinse water to leave the media pack before reinstallation.

お客様の製品に関する懸念事項

Permanent aluminum filters must balance open airflow with enough tortuous metal surface to collect contamination and survive frequent washing.

Disposable media clogs rapidly in oily or lint-heavy intake air.Layered aluminum mesh presents washable impingement surfaces that can be restored with water and suitable detergent.

A dense metal pack creates excessive fan resistance after only moderate loading.Crimped layers maintain open passages and distribute contamination through the filter depth.

Loose internal screens settle and leave an unfiltered path across the top of the frame.Expanded-metal face retainers compress and locate every media layer around the full perimeter.

Rinse water trapped in the bottom channel accelerates staining and microbial growth.Drain slots and an all-aluminum construction support complete drying before the filter returns to service.

典型的な用途

Outdoor-air intake pre-filtrationCompressor and generator ventilationCommercial kitchen make-up airIndustrial cabinets and machinery coolingWashable AHU coarse-filter banks

技術的なパラメータ

Typical construction ranges for an all-aluminum washable mesh panel are shown below.

コア材料	Multiple layers of crimped aluminum wire cloth and expanded aluminum mesh
パネルの厚さ	25, 50 or 100 mm nominal depth
有効幅	300-610 mm standard face width
最大長さ	Up to 1220 mm with suitable internal mesh support
鋼鉄の厚さを直面する	0.50-0.80 mm aluminum expanded-metal face retainers; no steel in the standard version
コア密度	Approximately 2700 kg/m³ for the aluminum mesh alloy
熱伝導率	Approximately 205-235 W/(m·K) for the aluminum alloy media
表面仕上げ	Mill-finish or conversion-coated natural aluminum
ジョイントタイプ	Crimped mesh layers mechanically retained between expanded-aluminum faces in a folded frame
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

25 mm single-bank or 50 mm double-bank constructionDry or light-tackified expanded-aluminum layersIntegrated handles and drain holesCustom face size and corrugated-mesh layer count

Planning a Washable Aluminum Mesh Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する