English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
ثلاثة الأبواب غرف نظيفة نظام التشابك
A three-channel airlock control package for vestibules with one common entrance and two controlled exits, or other cleanroom routes requiring defined three-door sequencing.
- Three Independent Door Channels
- Branching Airlock Logic
- Configurable Door Groups
- Individual Status Indication
مقدمة المنتج
The three-door interlock system extends standard airlock logic to a branching layout. Each door has its own closed-position input, release output and request/status station, while the controller defines which combinations must remain mutually exclusive. This supports a common entry serving two process rooms, a personnel-and-material branch, or a three-sided transfer vestibule. Channel-specific indication helps occupants identify which route is available rather than treating every locked condition as the same fault.
الخصائص الرئيسية
Programmable grouping permits all-door mutual exclusion or selected route combinations.
Individual status outputs identify the requested door and the channel currently blocking release.
Separate held-open timers reveal which of the three doors has exceeded its permitted opening time.
مخاوف المنتج للعملاء
Three-door layouts require unambiguous route logic because a simple pairwise interlock can create unintended releases or lock every exit unnecessarily.
A common entrance serves two clean rooms with different access paths.Three discrete channels apply the release rule to the selected branch instead of wiring separate controllers independently.
Users cannot tell which of two destination doors is available.Door-specific request and status indication shows each branch state locally.
Independent two-door relays create conflicting logic around the shared door.One controller evaluates all three door contacts before issuing any lock release.
تطبيقات نموذجية
Branching personnel airlocksThree-sided material vestibulesShared gowning-room exitsLaboratory corridor transfer nodes
المعلمات الفنية
Typical construction and interface ranges for a three-door cleanroom interlock system are listed below.
| المواد الأساسية | Three-channel programmable controller, power supply, relays, door contacts and operator stations |
|---|---|
| سمك اللوحة | 90–150 mm controller enclosure depth |
| العرض الفعال | 240–320 mm controller enclosure width |
| الحد الأقصى الطول | 400 mm controller enclosure height |
| الصلب يواجه سمك | 1.0–1.5 mm steel cabinet; stainless operator plates typically 1.2–2.0 mm |
| الكثافة الأساسية | Approximately 1800–1920 kg/m³ for the three-channel glass-reinforced PCB laminate |
| الموصلية الحرارية | Approximately 0.4–0.7 W/(m·K) for the channel-control PCB laminate |
| إنهاء السطح | Powder-coated control enclosure with labeled terminals and cleanroom-compatible operator stations |
| نوع المشترك | Three hardwired door channels with configurable grouping, common emergency input and auxiliary dry contacts |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
All-door or branch-specific exclusion logicThree touchless request stationsIndependent door-held alarmsAccess-control and BMS status contacts
Planning a Three-Door Cleanroom Interlock System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
