English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
قناع الوجه العقيم
A sterile white pleated cleanroom mask with low-lint outer film, soft ties and an enclosed adjustable nosepiece.
- Sterile pleat-style controlled-environment mask
- Four ultrasonically bonded soft ties
- Individually packaged and double bagged
مقدمة المنتج
The Sterile Face Mask combines a low-lint polyethylene process-facing layer with a protective inner structure and soft skin-facing material. Four ultrasonically bonded ties support secure positioning without relying on earloop tension, while a fully enclosed bendable nosepiece helps control the upper seal. Sterile individual packaging and double-bag transfer options support aseptic gowning workflows.
الخصائص الرئيسية
Four soft ties permit independent crown and neck adjustment
Pleated body expands from nose to below the chin
Low-lint polyethylene outer layer faces the process
Enclosed nosepiece avoids exposed wire edges
مخاوف المنتج للعملاء
Sterile masks require both intact packaging and correct aseptic donning. Tie placement, mask width and nose shaping must maintain coverage without contaminating the clean-facing surface.
Transfer packaging may not suit the facility's staged entry sequence.Select individually packaged, double-bagged supply for controlled transfer.
Loose ties can allow the mask to shift while speaking.Secure the upper ties first, shape the nosepiece, then fasten the lower ties.
Touching the mask front during donning can compromise aseptic handling.Use defined aseptic donning steps and handle only ties and clean edges.
A short body may pull away from the chin beneath a hood.Choose 180 or 230 mm body width based on facial and hood overlap needs.
تطبيقات نموذجية
Used in aseptic pharmaceutical and biotechnology processing, sterile compounding, medical-device production, clean laboratories and controlled transfer activities requiring a sterile mask component.
المعلمات الفنية
These values describe a sterile pleat-style cleanroom mask with soft ties. Sterile status and filtration data must remain traceable to the supplied configuration and packaging.
| المواد الأساسية | Polyester or polypropylene filter with polyethylene outer and soft inner facing |
|---|---|
| سمك اللوحة | 0.9–1.9 mm uncompressed |
| العرض الفعال | 180–230 mm |
| الحد الأقصى الطول | 230 mm mask body width |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 75–145 kg/m³ apparent multilayer bulk density |
| الموصلية الحرارية | 0.035–0.060 W/(m·K), material dependent |
| إنهاء السطح | Sterile white low-lint pleated outer with soft inner contact layer |
| نوع المشترك | Ultrasonically bonded perimeter and four ties with enclosed nosepiece |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
180 mm or 230 mm body widthFour soft ties or knitted earloopsPolyester or polypropylene filter structureIndividual sterile pouch and double-bag configurationWhite or application-specific outer colorPleat-style or pouch-style body
Planning a Sterile Face Mask specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
