Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Prendas de sala limpia, EPP y consumibles
Máscara estéril facial
A sterile white pleated cleanroom mask with low-lint outer film, soft ties and an enclosed adjustable nosepiece.
- Sterile pleat-style controlled-environment mask
- Four ultrasonically bonded soft ties
- Individually packaged and double bagged
Introducción del producto
The Sterile Face Mask combines a low-lint polyethylene process-facing layer with a protective inner structure and soft skin-facing material. Four ultrasonically bonded ties support secure positioning without relying on earloop tension, while a fully enclosed bendable nosepiece helps control the upper seal. Sterile individual packaging and double-bag transfer options support aseptic gowning workflows.
Características clave
Four soft ties permit independent crown and neck adjustment
Pleated body expands from nose to below the chin
Low-lint polyethylene outer layer faces the process
Enclosed nosepiece avoids exposed wire edges
Preocupaciones del producto del cliente
Sterile masks require both intact packaging and correct aseptic donning. Tie placement, mask width and nose shaping must maintain coverage without contaminating the clean-facing surface.
Transfer packaging may not suit the facility's staged entry sequence.Select individually packaged, double-bagged supply for controlled transfer.
Loose ties can allow the mask to shift while speaking.Secure the upper ties first, shape the nosepiece, then fasten the lower ties.
Touching the mask front during donning can compromise aseptic handling.Use defined aseptic donning steps and handle only ties and clean edges.
A short body may pull away from the chin beneath a hood.Choose 180 or 230 mm body width based on facial and hood overlap needs.
Aplicaciones típicas
Used in aseptic pharmaceutical and biotechnology processing, sterile compounding, medical-device production, clean laboratories and controlled transfer activities requiring a sterile mask component.
Parámetros técnicos
These values describe a sterile pleat-style cleanroom mask with soft ties. Sterile status and filtration data must remain traceable to the supplied configuration and packaging.
| Materiales Core | Polyester or polypropylene filter with polyethylene outer and soft inner facing |
|---|---|
| Panel de espesor | 0.9–1.9 mm uncompressed |
| Ancho efectivo | 180–230 mm |
| Longitud máxima | 230 mm mask body width |
| Acero frente a espesor | 0 mm; no steel facing used |
| Densidad Core | 75–145 kg/m³ apparent multilayer bulk density |
| Conductividad térmica | 0.035–0.060 W/(m·K), material dependent |
| Superficie acabada | Sterile white low-lint pleated outer with soft inner contact layer |
| Tipo conjunto | Ultrasonically bonded perimeter and four ties with enclosed nosepiece |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
180 mm or 230 mm body widthFour soft ties or knitted earloopsPolyester or polypropylene filter structureIndividual sterile pouch and double-bag configurationWhite or application-specific outer colorPleat-style or pouch-style body
Planning a Sterile Face Mask specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
