Sterile white face mask three-quarter view with four soft ties

Vêtements de salle blanche, EPI et consommables

Z Masque de visage stérile

A sterile white pleated cleanroom mask with low-lint outer film, soft ties and an enclosed adjustable nosepiece.

Sterile pleat-style controlled-environment mask
Four ultrasonically bonded soft ties
Individually packaged and double bagged

Introduction de produit

The Sterile Face Mask combines a low-lint polyethylene process-facing layer with a protective inner structure and soft skin-facing material. Four ultrasonically bonded ties support secure positioning without relying on earloop tension, while a fully enclosed bendable nosepiece helps control the upper seal. Sterile individual packaging and double-bag transfer options support aseptic gowning workflows.

Key Features

Sterile supply configuration for controlled aseptic gowning

Four soft ties permit independent crown and neck adjustment

Pleated body expands from nose to below the chin

Low-lint polyethylene outer layer faces the process

Enclosed nosepiece avoids exposed wire edges

Préoccupations du client produit

Sterile masks require both intact packaging and correct aseptic donning. Tie placement, mask width and nose shaping must maintain coverage without contaminating the clean-facing surface.

Transfer packaging may not suit the facility's staged entry sequence.Select individually packaged, double-bagged supply for controlled transfer.

Loose ties can allow the mask to shift while speaking.Secure the upper ties first, shape the nosepiece, then fasten the lower ties.

Touching the mask front during donning can compromise aseptic handling.Use defined aseptic donning steps and handle only ties and clean edges.

A short body may pull away from the chin beneath a hood.Choose 180 or 230 mm body width based on facial and hood overlap needs.

Les applications typiques

Used in aseptic pharmaceutical and biotechnology processing, sterile compounding, medical-device production, clean laboratories and controlled transfer activities requiring a sterile mask component.

Paramètres techniques

These values describe a sterile pleat-style cleanroom mask with soft ties. Sterile status and filtration data must remain traceable to the supplied configuration and packaging.

Matériaux de base	Polyester or polypropylene filter with polyethylene outer and soft inner facing
Panneau épaisseur	0.9–1.9 mm uncompressed
Largeur effective	180–230 mm
Longueur maximale	230 mm mask body width
Acier face épaisseur	0 mm; no steel facing used
Densité Core	75–145 kg/m³ apparent multilayer bulk density
Conductivité thermique	0.035–0.060 W/(m·K), material dependent
surface finie	Sterile white low-lint pleated outer with soft inner contact layer
Type joint	Ultrasonically bonded perimeter and four ties with enclosed nosepiece
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

180 mm or 230 mm body widthFour soft ties or knitted earloopsPolyester or polypropylene filter structureIndividual sterile pouch and double-bag configurationWhite or application-specific outer colorPleat-style or pouch-style body

Planning a Sterile Face Mask specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe