English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
الفولاذ المقاوم للصدأ غسل اليد بالوعة
A compact wall-mounted Type 304 stainless basin with a mechanical knee push panel, coved rectangular bowl, sloped backsplash, premixing valve and 40 mm waste outlet.
- Mechanical knee water control
- Coved single-piece basin
- 30-degree sloped backsplash
- Accessible plumbing shroud
مقدمة المنتج
This stainless steel hand washing sink uses a broad front knee panel to actuate the concealed mechanical water valve, leaving both hands free throughout washing. The 460 mm-wide Type 304 basin has radiused internal corners, an integral tap ledge and a 30-degree sloped backsplash that drains splashes toward the bowl. A preset hot/cold premixing valve supplies the fixed stainless spout, while a removable lower shroud protects the valve, hoses and 40 mm drain without sealing them into an inaccessible cabinet.
الخصائص الرئيسية
The coved rectangular bowl and welded drain transition remove sharp internal intersections around standing water.
The backward-sloped backsplash returns spray toward the bowl rather than forming a horizontal ledge.
A removable stainless shroud conceals plumbing while retaining direct service access to the mixer and valve linkage.
مخاوف المنتج للعملاء
Entry hand washing needs reliable hands-free water control, a compact wall footprint and serviceable plumbing without introducing electronic components into every station.
Operators touch a faucet handle immediately after soaping their hands.The broad knee panel controls the valve while both hands remain over the bowl.
Flat splashbacks retain droplets behind the spout and mixer area.The 30-degree rear panel slopes continuously back toward the coved basin.
Square bowl seams and separate tap decks trap residue around their junctions.A formed one-piece bowl and integral tap ledge use welded radiused transitions.
Fully enclosed cabinets make mechanical valve and drain maintenance slow.The front shroud removes independently to expose the linkage, mixer and 40 mm waste.
تطبيقات نموذجية
Cleanroom personnel entrance hand washingFood high-care hygiene stationsPharmaceutical support laboratoriesMedical-device production wash pointsControlled packaging room access
المعلمات الفنية
Typical configurable specifications for a compact knee-operated stainless hand washing sink are listed below.
| المواد الأساسية | Type 304 stainless coved bowl, sloped backsplash, knee panel, mechanical valve, premixer and removable plumbing shroud |
|---|---|
| سمك اللوحة | 1.2 mm formed basin, splashback and front shroud |
| العرض الفعال | 460 mm overall single-station width |
| الحد الأقصى الطول | 524 mm maximum overall height including backsplash |
| الصلب يواجه سمك | 1.2 mm Type 304 stainless exposed sheet surfaces |
| الكثافة الأساسية | 7900-8000 كجم / م3 لنوع 304 الفولاذ المقاوم للصدأ |
| الموصلية الحرارية | 14-17 W / (m · K) لنوع 304 الفولاذ المقاوم للصدأ |
| إنهاء السطح | Uniform #4 satin-brushed exterior with smooth coved bowl and passivated welds |
| نوع المشترك | Wall hanger bracket with sealed backsplash, knee-linked mechanical valve, flexible inlet unions and 40 mm welded waste |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Cold-water-only valveTimed mechanical shutoffIntegrated soap dispenserFloor-standing pedestal frame
Planning a Stainless Steel Hand Washing Sink specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
