Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Acier inoxydable Hand Washing Sink
A compact wall-mounted Type 304 stainless basin with a mechanical knee push panel, coved rectangular bowl, sloped backsplash, premixing valve and 40 mm waste outlet.
- Mechanical knee water control
- Coved single-piece basin
- 30-degree sloped backsplash
- Accessible plumbing shroud
Introduction de produit
This stainless steel hand washing sink uses a broad front knee panel to actuate the concealed mechanical water valve, leaving both hands free throughout washing. The 460 mm-wide Type 304 basin has radiused internal corners, an integral tap ledge and a 30-degree sloped backsplash that drains splashes toward the bowl. A preset hot/cold premixing valve supplies the fixed stainless spout, while a removable lower shroud protects the valve, hoses and 40 mm drain without sealing them into an inaccessible cabinet.
Key Features
The coved rectangular bowl and welded drain transition remove sharp internal intersections around standing water.
The backward-sloped backsplash returns spray toward the bowl rather than forming a horizontal ledge.
A removable stainless shroud conceals plumbing while retaining direct service access to the mixer and valve linkage.
Préoccupations du client produit
Entry hand washing needs reliable hands-free water control, a compact wall footprint and serviceable plumbing without introducing electronic components into every station.
Operators touch a faucet handle immediately after soaping their hands.The broad knee panel controls the valve while both hands remain over the bowl.
Flat splashbacks retain droplets behind the spout and mixer area.The 30-degree rear panel slopes continuously back toward the coved basin.
Square bowl seams and separate tap decks trap residue around their junctions.A formed one-piece bowl and integral tap ledge use welded radiused transitions.
Fully enclosed cabinets make mechanical valve and drain maintenance slow.The front shroud removes independently to expose the linkage, mixer and 40 mm waste.
Les applications typiques
Cleanroom personnel entrance hand washingFood high-care hygiene stationsPharmaceutical support laboratoriesMedical-device production wash pointsControlled packaging room access
Paramètres techniques
Typical configurable specifications for a compact knee-operated stainless hand washing sink are listed below.
| Matériaux de base | Type 304 stainless coved bowl, sloped backsplash, knee panel, mechanical valve, premixer and removable plumbing shroud |
|---|---|
| Panneau épaisseur | 1.2 mm formed basin, splashback and front shroud |
| Largeur effective | 460 mm overall single-station width |
| Longueur maximale | 524 mm maximum overall height including backsplash |
| Acier face épaisseur | 1.2 mm Type 304 stainless exposed sheet surfaces |
| Densité Core | 7900 - 8000 kg / m3 pour l'acier inoxydable de type 304 |
| Conductivité thermique | 14 - 17 W / (m · K) pour l'acier inoxydable de type 304 |
| surface finie | Uniform #4 satin-brushed exterior with smooth coved bowl and passivated welds |
| Type joint | Wall hanger bracket with sealed backsplash, knee-linked mechanical valve, flexible inlet unions and 40 mm welded waste |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Cold-water-only valveTimed mechanical shutoffIntegrated soap dispenserFloor-standing pedestal frame
Planning a Stainless Steel Hand Washing Sink specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
