English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
حاوية الفولاذ المقاوم للصدأ
A 30 L Type 316L cylindrical process container with a polished seamless body, removable silicone-gasketed lid, over-center clip band and folding side handles.
- 30 L cylindrical vessel
- 316L product-contact surfaces
- Silicone-gasketed clip lid
- Folding stainless handles
مقدمة المنتج
The stainless steel container holds powders, granules and cleaned components in a closed vessel between controlled process steps. Its cylindrical Type 316L body has a rolled upper bead and rounded base transition for easy access during cleaning. A flat stainless lid compresses a blue silicone gasket through an over-center clip band, providing a practical atmospheric-pressure closure without threaded product-contact parts. Folding Type 304 side handles lie close to the body when the vessel is stored or transferred on a cart.
الخصائص الرئيسية
The over-center clip band applies even gasket compression without multiple loose fasteners.
A blue silicone gasket is visible at the rim and can be removed separately for inspection.
Folding side handles reduce the outside envelope while retaining two-handed lifting points.
مخاوف المنتج للعملاء
A reusable process container must close predictably, expose its seal for inspection and remain easy to handle without threaded crevices around the product opening.
Individual lid clamps create uneven pressure and slow repeated opening.One over-center clip band distributes compression around the full silicone gasket.
A hidden lid seal cannot be checked before filling the vessel.The removable blue gasket seats visibly on the rolled upper rim.
Sharp base corners retain powder at the bottom perimeter.The cylindrical wall blends into the base through a broad internal radius.
Rigid protruding handles interfere with close cart loading and cabinet storage.Two stainless handles fold flat against the container body when released.
تطبيقات نموذجية
Pharmaceutical powder stagingClean component closed transferFood and cosmetic ingredient holdingLaboratory bulk sample storageBioprocess consumable collection
المعلمات الفنية
Typical configurable specifications for a Type 316L clip-sealed cleanroom process container are listed below.
| المواد الأساسية | Type 316L stainless cylindrical body and lid, Type 304 clip band and handles, blue silicone gasket |
|---|---|
| سمك اللوحة | 1.0 mm cylindrical vessel wall and lid panel |
| العرض الفعال | 360 mm nominal vessel diameter |
| الحد الأقصى الطول | 440 mm maximum overall width across folded side handles |
| الصلب يواجه سمك | 1.0 mm Type 316L body and lid sheet |
| الكثافة الأساسية | 7950–8050 kg/m³ for Type 316L stainless body components |
| الموصلية الحرارية | 14–16 W/(m·K) for Type 316L stainless body components |
| إنهاء السطح | Buff-polished internal and external stainless surfaces with contrasting blue silicone seal |
| نوع المشترك | Rolled vessel rim with removable silicone gasket and circumferential over-center clip-band closure |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
10–65 L capacitiesEPDM or FKM gasketElectropolished interiorDrain ferrule or sampling port
Planning a Stainless Steel Container specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
