Polished 316L stainless process container with clip-sealed lid

클린룸 가구 및 스테인레스 스틸 제품

스테인레스 스틸 컨테이너

A 30 L Type 316L cylindrical process container with a polished seamless body, removable silicone-gasketed lid, over-center clip band and folding side handles.

30 L cylindrical vessel
316L product-contact surfaces
Silicone-gasketed clip lid
Folding stainless handles

견적 요청 제품 찾아보기

상품 소개

The stainless steel container holds powders, granules and cleaned components in a closed vessel between controlled process steps. Its cylindrical Type 316L body has a rolled upper bead and rounded base transition for easy access during cleaning. A flat stainless lid compresses a blue silicone gasket through an over-center clip band, providing a practical atmospheric-pressure closure without threaded product-contact parts. Folding Type 304 side handles lie close to the body when the vessel is stored or transferred on a cart.

주요 기능

Type 316L body and lid surfaces provide a corrosion-resistant product-contact envelope.

The over-center clip band applies even gasket compression without multiple loose fasteners.

A blue silicone gasket is visible at the rim and can be removed separately for inspection.

Folding side handles reduce the outside envelope while retaining two-handed lifting points.

고객 제품 관심사

A reusable process container must close predictably, expose its seal for inspection and remain easy to handle without threaded crevices around the product opening.

Individual lid clamps create uneven pressure and slow repeated opening.One over-center clip band distributes compression around the full silicone gasket.

A hidden lid seal cannot be checked before filling the vessel.The removable blue gasket seats visibly on the rolled upper rim.

Sharp base corners retain powder at the bottom perimeter.The cylindrical wall blends into the base through a broad internal radius.

Rigid protruding handles interfere with close cart loading and cabinet storage.Two stainless handles fold flat against the container body when released.

일반적인 응용 프로그램

Pharmaceutical powder stagingClean component closed transferFood and cosmetic ingredient holdingLaboratory bulk sample storageBioprocess consumable collection

기술 매개변수

Typical configurable specifications for a Type 316L clip-sealed cleanroom process container are listed below.

핵심 재료	Type 316L stainless cylindrical body and lid, Type 304 clip band and handles, blue silicone gasket
패널 두께	1.0 mm cylindrical vessel wall and lid panel
유효 폭	360 mm nominal vessel diameter
최대 길이	440 mm maximum overall width across folded side handles
강철 면면 두께	1.0 mm Type 316L body and lid sheet
코어 밀도	7950–8050 kg/m³ for Type 316L stainless body components
열전도도 (Thermal Conductivity)	14–16 W/(m·K) for Type 316L stainless body components
표면 마무리	Buff-polished internal and external stainless surfaces with contrasting blue silicone seal
접합 유형	Rolled vessel rim with removable silicone gasket and circumferential over-center clip-band closure
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

10–65 L capacitiesEPDM or FKM gasketElectropolished interiorDrain ferrule or sampling port

Planning a Stainless Steel Container specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.