Polished 316L stainless process container with clip-sealed lid

クリーンルーム家具 · ステンレス製品

ステンレス鋼の容器

A 30 L Type 316L cylindrical process container with a polished seamless body, removable silicone-gasketed lid, over-center clip band and folding side handles.

30 L cylindrical vessel
316L product-contact surfaces
Silicone-gasketed clip lid
Folding stainless handles

見積もりリクエスト製品案内

商品紹介

The stainless steel container holds powders, granules and cleaned components in a closed vessel between controlled process steps. Its cylindrical Type 316L body has a rolled upper bead and rounded base transition for easy access during cleaning. A flat stainless lid compresses a blue silicone gasket through an over-center clip band, providing a practical atmospheric-pressure closure without threaded product-contact parts. Folding Type 304 side handles lie close to the body when the vessel is stored or transferred on a cart.

主要な特徴

Type 316L body and lid surfaces provide a corrosion-resistant product-contact envelope.

The over-center clip band applies even gasket compression without multiple loose fasteners.

A blue silicone gasket is visible at the rim and can be removed separately for inspection.

Folding side handles reduce the outside envelope while retaining two-handed lifting points.

お客様の製品に関する懸念事項

A reusable process container must close predictably, expose its seal for inspection and remain easy to handle without threaded crevices around the product opening.

Individual lid clamps create uneven pressure and slow repeated opening.One over-center clip band distributes compression around the full silicone gasket.

A hidden lid seal cannot be checked before filling the vessel.The removable blue gasket seats visibly on the rolled upper rim.

Sharp base corners retain powder at the bottom perimeter.The cylindrical wall blends into the base through a broad internal radius.

Rigid protruding handles interfere with close cart loading and cabinet storage.Two stainless handles fold flat against the container body when released.

典型的な用途

Pharmaceutical powder stagingClean component closed transferFood and cosmetic ingredient holdingLaboratory bulk sample storageBioprocess consumable collection

技術的なパラメータ

Typical configurable specifications for a Type 316L clip-sealed cleanroom process container are listed below.

コア材料	Type 316L stainless cylindrical body and lid, Type 304 clip band and handles, blue silicone gasket
パネルの厚さ	1.0 mm cylindrical vessel wall and lid panel
有効幅	360 mm nominal vessel diameter
最大長さ	440 mm maximum overall width across folded side handles
鋼鉄の厚さを直面する	1.0 mm Type 316L body and lid sheet
コア密度	7950–8050 kg/m³ for Type 316L stainless body components
熱伝導率	14–16 W/(m·K) for Type 316L stainless body components
表面仕上げ	Buff-polished internal and external stainless surfaces with contrasting blue silicone seal
ジョイントタイプ	Rolled vessel rim with removable silicone gasket and circumferential over-center clip-band closure
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

10–65 L capacitiesEPDM or FKM gasketElectropolished interiorDrain ferrule or sampling port

Planning a Stainless Steel Container specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する