English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة المرافق الغرف النظيفة
مضخة الطرد المركزي الصحية
A close-coupled 316L centrifugal pump for efficient circulation and transfer of clean utility water and low-viscosity hygienic liquids.
- Polished 316L wetted parts
- Low-hold-up hygienic wet end
- Single or flushed double seal options
مقدمة المنتج
The sanitary centrifugal pump combines a polished stainless volute and impeller with a close-coupled electric motor for compact clean-utility service. The open hygienic wet-end geometry supports effective cleaning, while external seal access simplifies inspection and replacement without disturbing facility piping more than necessary.
الخصائص الرئيسية
Single-stage end-suction hydraulic design
Polished hygienic volute and impeller
External single or double mechanical seal
Close-coupled compact footprint
Sanitary clamp or weld-end connections
Optional stainless motor shroud
Drainable installation orientation
مخاوف المنتج للعملاء
Reliable hygienic pumping requires the hydraulic curve, seal arrangement and installation geometry to match both normal operation and cleaning conditions.
The pump operates far from its efficient rangeSelect impeller diameter and motor speed from the actual system curve rather than pipe size alone.
Seal wear causes recurring leakageChoose seal materials and single, flushed or double configuration according to temperature, lubricity and cleaning exposure.
Air pockets interrupt stable circulationProvide flooded suction, adequate NPSH margin and ventable piping for a standard non-self-priming centrifugal pump.
Residue remains in the wet endInstall the pump in its specified drainable orientation and maintain the defined cleaning velocity through the casing.
تطبيقات نموذجية
Purified Water circulationWFI distribution supportCIP solution transferPharmaceutical buffer transferBiotechnology and cosmetic process utilities
المعلمات الفنية
Representative construction and envelope values vary by hydraulic size, motor power, seal arrangement and connection standard.
| المواد الأساسية | 316L stainless steel volute, impeller, shaft and product-contact fittings |
|---|---|
| سمك اللوحة | Stainless casing wall typically 3.0–10.0 mm according to pump size |
| العرض الفعال | Overall pump width typically 220–650 mm |
| الحد الأقصى الطول | Close-coupled pump and motor length typically up to 1600 mm |
| الصلب يواجه سمك | Optional stainless motor shroud typically 1.0–1.5 mm |
| الكثافة الأساسية | 316L stainless steel density approximately 8000 kg/m³ |
| الموصلية الحرارية | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| إنهاء السطح | Polished product-contact surfaces with satin external stainless finish |
| نوع المشترك | Sanitary clamp, weld-end or selected hygienic union connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single or double mechanical sealSeal flush housingVariable-frequency motorStainless motor shroudDifferent impeller trimsClamp or weld-end portsMobile trolley or fixed feetHigh-temperature elastomers
Planning a Sanitary Centrifugal Pump specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
