Sanitary centrifugal pump three-quarter view with hygienic wet end

클린룸 유틸리티 시스템

원심 펌프 Sanitary Centrifugal Pump

A close-coupled 316L centrifugal pump for efficient circulation and transfer of clean utility water and low-viscosity hygienic liquids.

Polished 316L wetted parts
Low-hold-up hygienic wet end
Single or flushed double seal options

견적 요청 제품 찾아보기

상품 소개

The sanitary centrifugal pump combines a polished stainless volute and impeller with a close-coupled electric motor for compact clean-utility service. The open hygienic wet-end geometry supports effective cleaning, while external seal access simplifies inspection and replacement without disturbing facility piping more than necessary.

주요 기능

316L stainless steel wetted components

Single-stage end-suction hydraulic design

Polished hygienic volute and impeller

External single or double mechanical seal

Close-coupled compact footprint

Sanitary clamp or weld-end connections

Optional stainless motor shroud

Drainable installation orientation

고객 제품 관심사

Reliable hygienic pumping requires the hydraulic curve, seal arrangement and installation geometry to match both normal operation and cleaning conditions.

The pump operates far from its efficient rangeSelect impeller diameter and motor speed from the actual system curve rather than pipe size alone.

Seal wear causes recurring leakageChoose seal materials and single, flushed or double configuration according to temperature, lubricity and cleaning exposure.

Air pockets interrupt stable circulationProvide flooded suction, adequate NPSH margin and ventable piping for a standard non-self-priming centrifugal pump.

Residue remains in the wet endInstall the pump in its specified drainable orientation and maintain the defined cleaning velocity through the casing.

일반적인 응용 프로그램

Purified Water circulationWFI distribution supportCIP solution transferPharmaceutical buffer transferBiotechnology and cosmetic process utilities

기술 매개변수

Representative construction and envelope values vary by hydraulic size, motor power, seal arrangement and connection standard.

핵심 재료	316L stainless steel volute, impeller, shaft and product-contact fittings
패널 두께	Stainless casing wall typically 3.0–10.0 mm according to pump size
유효 폭	Overall pump width typically 220–650 mm
최대 길이	Close-coupled pump and motor length typically up to 1600 mm
강철 면면 두께	Optional stainless motor shroud typically 1.0–1.5 mm
코어 밀도	316L stainless steel density approximately 8000 kg/m³
열전도도 (Thermal Conductivity)	316L stainless steel approximately 15 W/(m·K) at ambient temperature
표면 마무리	Polished product-contact surfaces with satin external stainless finish
접합 유형	Sanitary clamp, weld-end or selected hygienic union connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or double mechanical sealSeal flush housingVariable-frequency motorStainless motor shroudDifferent impeller trimsClamp or weld-end portsMobile trolley or fixed feetHigh-temperature elastomers

Planning a Sanitary Centrifugal Pump specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.