Sanitary centrifugal pump three-quarter view with hygienic wet end

Утилитарные системы для чистых помещений

Санитарный центробежный насос

A close-coupled 316L centrifugal pump for efficient circulation and transfer of clean utility water and low-viscosity hygienic liquids.

Polished 316L wetted parts
Low-hold-up hygienic wet end
Single or flushed double seal options

Запрос котировки Просмотреть продукты

Введение продукции

The sanitary centrifugal pump combines a polished stainless volute and impeller with a close-coupled electric motor for compact clean-utility service. The open hygienic wet-end geometry supports effective cleaning, while external seal access simplifies inspection and replacement without disturbing facility piping more than necessary.

Основные характеристики

316L stainless steel wetted components

Single-stage end-suction hydraulic design

Polished hygienic volute and impeller

External single or double mechanical seal

Close-coupled compact footprint

Sanitary clamp or weld-end connections

Optional stainless motor shroud

Drainable installation orientation

Обеспокоенность клиентов продуктами

Reliable hygienic pumping requires the hydraulic curve, seal arrangement and installation geometry to match both normal operation and cleaning conditions.

The pump operates far from its efficient rangeSelect impeller diameter and motor speed from the actual system curve rather than pipe size alone.

Seal wear causes recurring leakageChoose seal materials and single, flushed or double configuration according to temperature, lubricity and cleaning exposure.

Air pockets interrupt stable circulationProvide flooded suction, adequate NPSH margin and ventable piping for a standard non-self-priming centrifugal pump.

Residue remains in the wet endInstall the pump in its specified drainable orientation and maintain the defined cleaning velocity through the casing.

Типичные приложения

Purified Water circulationWFI distribution supportCIP solution transferPharmaceutical buffer transferBiotechnology and cosmetic process utilities

Технические параметры

Representative construction and envelope values vary by hydraulic size, motor power, seal arrangement and connection standard.

Основной материал	316L stainless steel volute, impeller, shaft and product-contact fittings
Толщина панели	Stainless casing wall typically 3.0–10.0 mm according to pump size
эффективная ширина	Overall pump width typically 220–650 mm
Максимальная длина	Close-coupled pump and motor length typically up to 1600 mm
Толщина линий стали	Optional stainless motor shroud typically 1.0–1.5 mm
Плотность ядра	316L stainless steel density approximately 8000 kg/m³
Теплопроводимость	316L stainless steel approximately 15 W/(m·K) at ambient temperature
Поверхностная отделка	Polished product-contact surfaces with satin external stainless finish
Объединенный тип	Sanitary clamp, weld-end or selected hygienic union connections
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Single or double mechanical sealSeal flush housingVariable-frequency motorStainless motor shroudDifferent impeller trimsClamp or weld-end portsMobile trolley or fixed feetHigh-temperature elastomers

Planning a Sanitary Centrifugal Pump specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой