Sanitary centrifugal pump three-quarter view with hygienic wet end

クリーンルームユーティリティシステム

衛生上の遠心ポンプ

A close-coupled 316L centrifugal pump for efficient circulation and transfer of clean utility water and low-viscosity hygienic liquids.

Polished 316L wetted parts
Low-hold-up hygienic wet end
Single or flushed double seal options

見積もりリクエスト製品案内

商品紹介

The sanitary centrifugal pump combines a polished stainless volute and impeller with a close-coupled electric motor for compact clean-utility service. The open hygienic wet-end geometry supports effective cleaning, while external seal access simplifies inspection and replacement without disturbing facility piping more than necessary.

主要な特徴

316L stainless steel wetted components

Single-stage end-suction hydraulic design

Polished hygienic volute and impeller

External single or double mechanical seal

Close-coupled compact footprint

Sanitary clamp or weld-end connections

Optional stainless motor shroud

Drainable installation orientation

お客様の製品に関する懸念事項

Reliable hygienic pumping requires the hydraulic curve, seal arrangement and installation geometry to match both normal operation and cleaning conditions.

The pump operates far from its efficient rangeSelect impeller diameter and motor speed from the actual system curve rather than pipe size alone.

Seal wear causes recurring leakageChoose seal materials and single, flushed or double configuration according to temperature, lubricity and cleaning exposure.

Air pockets interrupt stable circulationProvide flooded suction, adequate NPSH margin and ventable piping for a standard non-self-priming centrifugal pump.

Residue remains in the wet endInstall the pump in its specified drainable orientation and maintain the defined cleaning velocity through the casing.

典型的な用途

Purified Water circulationWFI distribution supportCIP solution transferPharmaceutical buffer transferBiotechnology and cosmetic process utilities

技術的なパラメータ

Representative construction and envelope values vary by hydraulic size, motor power, seal arrangement and connection standard.

コア材料	316L stainless steel volute, impeller, shaft and product-contact fittings
パネルの厚さ	Stainless casing wall typically 3.0–10.0 mm according to pump size
有効幅	Overall pump width typically 220–650 mm
最大長さ	Close-coupled pump and motor length typically up to 1600 mm
鋼鉄の厚さを直面する	Optional stainless motor shroud typically 1.0–1.5 mm
コア密度	316L stainless steel density approximately 8000 kg/m³
熱伝導率	316L stainless steel approximately 15 W/(m·K) at ambient temperature
表面仕上げ	Polished product-contact surfaces with satin external stainless finish
ジョイントタイプ	Sanitary clamp, weld-end or selected hygienic union connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single or double mechanical sealSeal flush housingVariable-frequency motorStainless motor shroudDifferent impeller trimsClamp or weld-end portsMobile trolley or fixed feetHigh-temperature elastomers

Planning a Sanitary Centrifugal Pump specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する