English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
Recessed غرف الأبحاث الصمام الخفيفة
A flush ceiling LED luminaire with a gasketed door frame and smooth opal optic that preserves a cleanable room-side surface.
- Flush Recessed Face
- Sealed Opal Optic
- White Powder-Coated Housing
- Serviceable Driver Compartment
مقدمة المنتج
This recessed fixture seats within a modular or hard cleanroom ceiling and presents only its smooth lens frame to the controlled space. A continuous closed-cell gasket closes the perimeter between the luminaire and ceiling opening, while the formed steel housing keeps the driver and wiring above the room plane. The opal diffuser softens individual LED points and the captive frame can be opened for maintenance without loose fasteners entering the clean zone.
الخصائص الرئيسية
The smooth opal lens distributes light evenly across benches and circulation aisles.
Captive latches retain the lens frame during room-side access.
The separate rear wiring chamber limits disturbance to the optical cavity.
A low-sheen white coating provides visible contrast for residue during routine cleaning.
مخاوف المنتج للعملاء
A recessed luminaire must illuminate the room without turning the ceiling cutout into a particle or pressure leakage path.
Ordinary troffers leave open gaps around the ceiling aperture.An overlapping trim and compressible perimeter gasket close the room-side interface.
Exposed screws and prismatic lenses collect cleaning residue.A smooth opal panel and captive flush latches remove common dirt traps.
LED point images create glare above reflective work surfaces.The diffusing optic blends the emitters into a broad luminous plane.
Driver replacement can release loose hardware into the clean zone.A retained service frame and separated component compartment organize maintenance.
تطبيقات نموذجية
Pharmaceutical filling roomsMedical-device assembly suitesBiotechnology cleanroom production suitesControlled packaging areas
المعلمات الفنية
Typical configurable construction ranges for a recessed cleanroom LED luminaire are listed below.
| المواد الأساسية | Die-formed galvanized steel housing with LED boards, driver and an opal polycarbonate or acrylic optic |
|---|---|
| سمك اللوحة | 75-120 mm sealed luminaire body depth |
| العرض الفعال | 595-620 mm nominal ceiling-module width |
| الحد الأقصى الطول | Up to 1245 mm overall fixture length |
| الصلب يواجه سمك | 0.8-1.2 mm formed galvanized sheet-steel housing and frame |
| الكثافة الأساسية | Approximately 1180-1220 kg/m³ for the polymer optical panel |
| الموصلية الحرارية | 0.19-0.22 W/(m·K) for the polymer diffuser |
| إنهاء السطح | Low-sheen white powder-coated metal with a smooth opal room-side lens |
| نوع المشترك | Overlapping recessed trim with continuous closed-cell gasket and captive lens-frame latches |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
600 x 600 mm or 300 x 1200 mm format0-10 V or DALI dimmingRoom-side or plenum-side service accessClear, prismatic or opal lens
Planning a Recessed Cleanroom LED Light specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
