Three-quarter view of a recessed cleanroom LED luminaire with white sealed frame

Освещение и электрическое оборудование в чистых помещениях

Вскрытый чистый дом светодиодный свет

A flush ceiling LED luminaire with a gasketed door frame and smooth opal optic that preserves a cleanable room-side surface.

Flush Recessed Face
Sealed Opal Optic
White Powder-Coated Housing
Serviceable Driver Compartment

Запрос котировки Просмотреть продукты

Введение продукции

This recessed fixture seats within a modular or hard cleanroom ceiling and presents only its smooth lens frame to the controlled space. A continuous closed-cell gasket closes the perimeter between the luminaire and ceiling opening, while the formed steel housing keeps the driver and wiring above the room plane. The opal diffuser softens individual LED points and the captive frame can be opened for maintenance without loose fasteners entering the clean zone.

Основные характеристики

A broad overlapping trim covers the ceiling cut edge and supports a continuous sanitary seal.

The smooth opal lens distributes light evenly across benches and circulation aisles.

Captive latches retain the lens frame during room-side access.

The separate rear wiring chamber limits disturbance to the optical cavity.

A low-sheen white coating provides visible contrast for residue during routine cleaning.

Обеспокоенность клиентов продуктами

A recessed luminaire must illuminate the room without turning the ceiling cutout into a particle or pressure leakage path.

Ordinary troffers leave open gaps around the ceiling aperture.An overlapping trim and compressible perimeter gasket close the room-side interface.

Exposed screws and prismatic lenses collect cleaning residue.A smooth opal panel and captive flush latches remove common dirt traps.

LED point images create glare above reflective work surfaces.The diffusing optic blends the emitters into a broad luminous plane.

Driver replacement can release loose hardware into the clean zone.A retained service frame and separated component compartment organize maintenance.

Типичные приложения

Pharmaceutical filling roomsMedical-device assembly suitesBiotechnology cleanroom production suitesControlled packaging areas

Технические параметры

Typical configurable construction ranges for a recessed cleanroom LED luminaire are listed below.

Основной материал	Die-formed galvanized steel housing with LED boards, driver and an opal polycarbonate or acrylic optic
Толщина панели	75-120 mm sealed luminaire body depth
эффективная ширина	595-620 mm nominal ceiling-module width
Максимальная длина	Up to 1245 mm overall fixture length
Толщина линий стали	0.8-1.2 mm formed galvanized sheet-steel housing and frame
Плотность ядра	Approximately 1180-1220 kg/m³ for the polymer optical panel
Теплопроводимость	0.19-0.22 W/(m·K) for the polymer diffuser
Поверхностная отделка	Low-sheen white powder-coated metal with a smooth opal room-side lens
Объединенный тип	Overlapping recessed trim with continuous closed-cell gasket and captive lens-frame latches
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

600 x 600 mm or 300 x 1200 mm format0-10 V or DALI dimmingRoom-side or plenum-side service accessClear, prismatic or opal lens

Planning a Recessed Cleanroom LED Light specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой