Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Receso Cleanroom LED Luz
A flush ceiling LED luminaire with a gasketed door frame and smooth opal optic that preserves a cleanable room-side surface.
- Flush Recessed Face
- Sealed Opal Optic
- White Powder-Coated Housing
- Serviceable Driver Compartment
Introducción del producto
This recessed fixture seats within a modular or hard cleanroom ceiling and presents only its smooth lens frame to the controlled space. A continuous closed-cell gasket closes the perimeter between the luminaire and ceiling opening, while the formed steel housing keeps the driver and wiring above the room plane. The opal diffuser softens individual LED points and the captive frame can be opened for maintenance without loose fasteners entering the clean zone.
Características clave
The smooth opal lens distributes light evenly across benches and circulation aisles.
Captive latches retain the lens frame during room-side access.
The separate rear wiring chamber limits disturbance to the optical cavity.
A low-sheen white coating provides visible contrast for residue during routine cleaning.
Preocupaciones del producto del cliente
A recessed luminaire must illuminate the room without turning the ceiling cutout into a particle or pressure leakage path.
Ordinary troffers leave open gaps around the ceiling aperture.An overlapping trim and compressible perimeter gasket close the room-side interface.
Exposed screws and prismatic lenses collect cleaning residue.A smooth opal panel and captive flush latches remove common dirt traps.
LED point images create glare above reflective work surfaces.The diffusing optic blends the emitters into a broad luminous plane.
Driver replacement can release loose hardware into the clean zone.A retained service frame and separated component compartment organize maintenance.
Aplicaciones típicas
Pharmaceutical filling roomsMedical-device assembly suitesBiotechnology cleanroom production suitesControlled packaging areas
Parámetros técnicos
Typical configurable construction ranges for a recessed cleanroom LED luminaire are listed below.
| Materiales Core | Die-formed galvanized steel housing with LED boards, driver and an opal polycarbonate or acrylic optic |
|---|---|
| Panel de espesor | 75-120 mm sealed luminaire body depth |
| Ancho efectivo | 595-620 mm nominal ceiling-module width |
| Longitud máxima | Up to 1245 mm overall fixture length |
| Acero frente a espesor | 0.8-1.2 mm formed galvanized sheet-steel housing and frame |
| Densidad Core | Approximately 1180-1220 kg/m³ for the polymer optical panel |
| Conductividad térmica | 0.19-0.22 W/(m·K) for the polymer diffuser |
| Superficie acabada | Low-sheen white powder-coated metal with a smooth opal room-side lens |
| Tipo conjunto | Overlapping recessed trim with continuous closed-cell gasket and captive lens-frame latches |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
600 x 600 mm or 300 x 1200 mm format0-10 V or DALI dimmingRoom-side or plenum-side service accessClear, prismatic or opal lens
Planning a Recessed Cleanroom LED Light specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
