Three-quarter view of a recessed cleanroom LED luminaire with white sealed frame

클린룸 조명 및 전기 장비

Recessed Cleanroom LED 조명

A flush ceiling LED luminaire with a gasketed door frame and smooth opal optic that preserves a cleanable room-side surface.

Flush Recessed Face
Sealed Opal Optic
White Powder-Coated Housing
Serviceable Driver Compartment

견적 요청 제품 찾아보기

상품 소개

This recessed fixture seats within a modular or hard cleanroom ceiling and presents only its smooth lens frame to the controlled space. A continuous closed-cell gasket closes the perimeter between the luminaire and ceiling opening, while the formed steel housing keeps the driver and wiring above the room plane. The opal diffuser softens individual LED points and the captive frame can be opened for maintenance without loose fasteners entering the clean zone.

주요 기능

A broad overlapping trim covers the ceiling cut edge and supports a continuous sanitary seal.

The smooth opal lens distributes light evenly across benches and circulation aisles.

Captive latches retain the lens frame during room-side access.

The separate rear wiring chamber limits disturbance to the optical cavity.

A low-sheen white coating provides visible contrast for residue during routine cleaning.

고객 제품 관심사

A recessed luminaire must illuminate the room without turning the ceiling cutout into a particle or pressure leakage path.

Ordinary troffers leave open gaps around the ceiling aperture.An overlapping trim and compressible perimeter gasket close the room-side interface.

Exposed screws and prismatic lenses collect cleaning residue.A smooth opal panel and captive flush latches remove common dirt traps.

LED point images create glare above reflective work surfaces.The diffusing optic blends the emitters into a broad luminous plane.

Driver replacement can release loose hardware into the clean zone.A retained service frame and separated component compartment organize maintenance.

일반적인 응용 프로그램

Pharmaceutical filling rooms의료기기 어셈블리 스위트Biotechnology cleanroom production suitesControlled packaging areas

기술 매개변수

Typical configurable construction ranges for a recessed cleanroom LED luminaire are listed below.

핵심 재료	Die-formed galvanized steel housing with LED boards, driver and an opal polycarbonate or acrylic optic
패널 두께	75-120 mm sealed luminaire body depth
유효 폭	595-620 mm nominal ceiling-module width
최대 길이	Up to 1245 mm overall fixture length
강철 면면 두께	0.8-1.2 mm formed galvanized sheet-steel housing and frame
코어 밀도	Approximately 1180-1220 kg/m³ for the polymer optical panel
열전도도 (Thermal Conductivity)	0.19-0.22 W/(m·K) for the polymer diffuser
표면 마무리	Low-sheen white powder-coated metal with a smooth opal room-side lens
접합 유형	Overlapping recessed trim with continuous closed-cell gasket and captive lens-frame latches
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

600 x 600 mm or 300 x 1200 mm format0-10 V or DALI dimmingRoom-side or plenum-side service accessClear, prismatic or opal lens

Planning a Recessed Cleanroom LED Light specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.