English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
عزل الاحتواء السلبي للضغط
A general-purpose negative-pressure process glovebox configured around potent, sensitizing or dusty materials that must remain separated from operators and the room.
- Inward Leakage Direction
- Process-Specific Glove Layout
- Closed Ingress and Egress
- Safe-Change Exhaust Options
مقدمة المنتج
This isolator is a configurable containment platform rather than a pharmacy-specific unit. The welded chamber operates below room pressure, and process equipment, feed chutes or balances can be integrated inside the glove-access work zone. Materials enter and leave through transfer hatches, split valves, continuous liners or other sealed connections selected for the process. Staged exhaust filtration and contained maintenance interfaces keep collected particulate within the barrier system.
الخصائص الرئيسية
Glove and equipment positions are arranged around the actual process sequence.
Multiple transfer technologies can connect source, receiver and waste routes.
Safe-change filters reduce contact with collected particulate during service.
Welded radiused surfaces support dry cleaning, wipe-down or selected wash methods.
مخاوف المنتج للعملاء
Containment performance depends on the process interfaces and maintenance route as much as on the chamber pressure itself.
The chamber is sealed but source containers connect through an open chute.A selected closed transfer interface continues the barrier to the source vessel.
Glove ports do not align with installed process equipment.Reach studies position ports, supports and controls before chamber fabrication.
Filter change becomes the highest-exposure maintenance task.Bag-in/bag-out or push-through filter housings contain the loaded stage.
One cleaning method is specified for every material.Surface finish, drainability and wash features are matched to the actual product and campaign.
تطبيقات نموذجية
Potent API processingSensitizing powder handlingContained laboratory-scale manufacturingHazardous sample subdivision
المعلمات الفنية
Typical configurable construction ranges for a negative-pressure containment isolator are listed below.
| المواد الأساسية | Fully welded SUS316L process chamber with safety glass, CSM glove assemblies and staged containment filtration |
|---|---|
| سمك اللوحة | 50-120 mm double-skin process and filter sections |
| العرض الفعال | 1200-5000 mm usable process width |
| الحد الأقصى الطول | Up to 8000 mm overall isolator length |
| الصلب يواجه سمك | 2.0-4.0 mm SUS316L chamber shell; 1.2-2.0 mm service skins |
| الكثافة الأساسية | ما يقرب من 8000 كجم / م3 للمواد الهيكلية SUS316L |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Fine-brushed or electropolished SUS316L with welded radiused internal transitions |
| نوع المشترك | Pressure-tight welded chamber with sealed glove ports, flanged process connections and safe-change filters |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Split valve or continuous linerIntegrated balance or process equipmentWash-in-place spray systemRemote technical-side filter service
Planning a Negative-Pressure Containment Isolator specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
