Negative-pressure containment isolator with multiple process interfaces

Aliran Laminar dan Peralatan Pengekangan

Tekanan negatif-Pengekangan Isolator

A general-purpose negative-pressure process glovebox configured around potent, sensitizing or dusty materials that must remain separated from operators and the room.

Inward Leakage Direction
Process-Specific Glove Layout
Closed Ingress and Egress
Safe-Change Exhaust Options

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This isolator is a configurable containment platform rather than a pharmacy-specific unit. The welded chamber operates below room pressure, and process equipment, feed chutes or balances can be integrated inside the glove-access work zone. Materials enter and leave through transfer hatches, split valves, continuous liners or other sealed connections selected for the process. Staged exhaust filtration and contained maintenance interfaces keep collected particulate within the barrier system.

Ciri-ciri Utama

Negative chamber pressure sets any leakage direction toward the contained process.

Glove and equipment positions are arranged around the actual process sequence.

Multiple transfer technologies can connect source, receiver and waste routes.

Safe-change filters reduce contact with collected particulate during service.

Welded radiused surfaces support dry cleaning, wipe-down or selected wash methods.

Kebimbangan Produk Pelanggan

Containment performance depends on the process interfaces and maintenance route as much as on the chamber pressure itself.

The chamber is sealed but source containers connect through an open chute.A selected closed transfer interface continues the barrier to the source vessel.

Glove ports do not align with installed process equipment.Reach studies position ports, supports and controls before chamber fabrication.

Filter change becomes the highest-exposure maintenance task.Bag-in/bag-out or push-through filter housings contain the loaded stage.

One cleaning method is specified for every material.Surface finish, drainability and wash features are matched to the actual product and campaign.

Permohonan yang biasa

Potent API processingSensitizing powder handlingContained laboratory-scale manufacturingHazardous sample subdivision

Parameter teknikal

Typical configurable construction ranges for a negative-pressure containment isolator are listed below.

Bahan Teras	Fully welded SUS316L process chamber with safety glass, CSM glove assemblies and staged containment filtration
Ketebalan Panel	50-120 mm double-skin process and filter sections
Lebar berkesan	1200-5000 mm usable process width
Panjang maksimum	Up to 8000 mm overall isolator length
Keluli Menghadapi Ketebalan	2.0-4.0 mm SUS316L chamber shell; 1.2-2.0 mm service skins
Ketumpatan teras	Kira-kira 8000 kg / m3 untuk bahan struktur SUS316L
Kekonduksian Terma	14-16 W / (m · K) untuk keluli tahan karat austenit
Kemasan permukaan	Fine-brushed or electropolished SUS316L with welded radiused internal transitions
Jenis Bersatu	Pressure-tight welded chamber with sealed glove ports, flanged process connections and safe-change filters
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Split valve or continuous linerIntegrated balance or process equipmentWash-in-place spray systemRemote technical-side filter service

Planning a Negative-Pressure Containment Isolator specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami