Negative-pressure containment isolator with multiple process interfaces

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

음압 격리기

A general-purpose negative-pressure process glovebox configured around potent, sensitizing or dusty materials that must remain separated from operators and the room.

Inward Leakage Direction
Process-Specific Glove Layout
Closed Ingress and Egress
Safe-Change Exhaust Options

견적 요청 제품 찾아보기

상품 소개

This isolator is a configurable containment platform rather than a pharmacy-specific unit. The welded chamber operates below room pressure, and process equipment, feed chutes or balances can be integrated inside the glove-access work zone. Materials enter and leave through transfer hatches, split valves, continuous liners or other sealed connections selected for the process. Staged exhaust filtration and contained maintenance interfaces keep collected particulate within the barrier system.

주요 기능

Negative chamber pressure sets any leakage direction toward the contained process.

Glove and equipment positions are arranged around the actual process sequence.

Multiple transfer technologies can connect source, receiver and waste routes.

Safe-change filters reduce contact with collected particulate during service.

Welded radiused surfaces support dry cleaning, wipe-down or selected wash methods.

고객 제품 관심사

Containment performance depends on the process interfaces and maintenance route as much as on the chamber pressure itself.

The chamber is sealed but source containers connect through an open chute.A selected closed transfer interface continues the barrier to the source vessel.

Glove ports do not align with installed process equipment.Reach studies position ports, supports and controls before chamber fabrication.

Filter change becomes the highest-exposure maintenance task.Bag-in/bag-out or push-through filter housings contain the loaded stage.

One cleaning method is specified for every material.Surface finish, drainability and wash features are matched to the actual product and campaign.

일반적인 응용 프로그램

Potent API processingSensitizing powder handlingContained laboratory-scale manufacturingHazardous sample subdivision

기술 매개변수

Typical configurable construction ranges for a negative-pressure containment isolator are listed below.

핵심 재료	Fully welded SUS316L process chamber with safety glass, CSM glove assemblies and staged containment filtration
패널 두께	50-120 mm double-skin process and filter sections
유효 폭	1200-5000 mm usable process width
최대 길이	Up to 8000 mm overall isolator length
강철 면면 두께	2.0-4.0 mm SUS316L chamber shell; 1.2-2.0 mm service skins
코어 밀도	SUS 316 L 구조 재료의 경우 약 8000 kg / m 3
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Fine-brushed or electropolished SUS316L with welded radiused internal transitions
접합 유형	Pressure-tight welded chamber with sealed glove ports, flanged process connections and safe-change filters
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Split valve or continuous linerIntegrated balance or process equipmentWash-in-place spray systemRemote technical-side filter service

Planning a Negative-Pressure Containment Isolator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.