English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة التحكم في الغرف النظيفة والمراقبة البيئية
Magnehelic مقياس الضغط التفاضلي
A mechanical low-pressure gauge with a large analog dial for continuous room, filter or duct differential indication without an external power supply.
- No Operating Power
- Large Analog Dial
- Low-Pressure Ranges
- Flush or Surface Mount
مقدمة المنتج
The Magnehelic differential pressure gauge converts a low pressure difference into pointer movement through a diaphragm and magnetic linkage. The mechanism isolates the process air from the dial train and provides a clear zero-centered or positive scale. With no electrical power required, the gauge remains useful as an independent local indication beside electronic control or monitoring instruments. Front zero adjustment, high and low ports and flush-mount hardware support straightforward installation on cleanroom walls and filter housings.
الخصائص الرئيسية
A large white dial and black pointer allow quick condition checks at normal viewing distance.
Diaphragm and magnetic linkage separate the pressure chamber from the pointer mechanism.
Front zero adjustment permits routine correction without opening the instrument body.
مخاوف المنتج للعملاء
A local mechanical gauge is most valuable when it stays readable, stable near zero and independent of the main control system.
A power or network interruption removes the only room pressure indication.The mechanical dial continues to show differential pressure without external power.
Small scale markings make low pressure changes hard to judge.A broad circular scale spreads the selected pressure range over a large pointer arc.
Tubing direction is confused during wall installation.Clearly marked high and low ports establish the positive reference side.
The pointer no longer rests at zero after long service.A front-access zero screw permits correction with both ports at equal pressure.
تطبيقات نموذجية
Local room-to-room pressure indicationHEPA filter loadingFan and duct pressureAirlock differential indication
المعلمات الفنية
Typical materials and dimensions for a cleanroom mechanical differential pressure gauge are listed below.
| المواد الأساسية | Silicone diaphragm with die-cast aluminum case, magnetic linkage and clear polycarbonate lens |
|---|---|
| سمك اللوحة | 45-65 mm gauge body depth |
| العرض الفعال | 100-125 mm dial diameter |
| الحد الأقصى الطول | Up to 150 mm overall body dimension with fittings |
| الصلب يواجه سمك | 0 mm; die-cast aluminum instrument case |
| الكثافة الأساسية | 2650-2750 kg/m³ for aluminum case components |
| الموصلية الحرارية | 150-220 W/(m·K) for the aluminum case |
| إنهاء السطح | Black or dark-gray case with white dial, black pointer and clear lens |
| نوع المشترك | Dual high-low pressure connections with flush-mount ring or surface bracket |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Positive or bidirectional scalePa or inch-water-column dialFlush or surface mountingStatic pressure tips and tubing kit
Planning a Magnehelic Differential Pressure Gauge specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
