Complete black Magnehelic differential pressure gauge with white analog dial in three-quarter view

クリーンルーム管理 · 環境モニタリングシステム

Magnehelic 差動圧力ゲージ

A mechanical low-pressure gauge with a large analog dial for continuous room, filter or duct differential indication without an external power supply.

No Operating Power
Large Analog Dial
Low-Pressure Ranges
Flush or Surface Mount

見積もりリクエスト製品案内

商品紹介

The Magnehelic differential pressure gauge converts a low pressure difference into pointer movement through a diaphragm and magnetic linkage. The mechanism isolates the process air from the dial train and provides a clear zero-centered or positive scale. With no electrical power required, the gauge remains useful as an independent local indication beside electronic control or monitoring instruments. Front zero adjustment, high and low ports and flush-mount hardware support straightforward installation on cleanroom walls and filter housings.

主要な特徴

Mechanical indication remains visible during controller, network or power interruptions.

A large white dial and black pointer allow quick condition checks at normal viewing distance.

Diaphragm and magnetic linkage separate the pressure chamber from the pointer mechanism.

Front zero adjustment permits routine correction without opening the instrument body.

お客様の製品に関する懸念事項

A local mechanical gauge is most valuable when it stays readable, stable near zero and independent of the main control system.

A power or network interruption removes the only room pressure indication.The mechanical dial continues to show differential pressure without external power.

Small scale markings make low pressure changes hard to judge.A broad circular scale spreads the selected pressure range over a large pointer arc.

Tubing direction is confused during wall installation.Clearly marked high and low ports establish the positive reference side.

The pointer no longer rests at zero after long service.A front-access zero screw permits correction with both ports at equal pressure.

典型的な用途

Local room-to-room pressure indicationHEPA filter loadingFan and duct pressureAirlock differential indication

技術的なパラメータ

Typical materials and dimensions for a cleanroom mechanical differential pressure gauge are listed below.

コア材料	Silicone diaphragm with die-cast aluminum case, magnetic linkage and clear polycarbonate lens
パネルの厚さ	45-65 mm gauge body depth
有効幅	100-125 mm dial diameter
最大長さ	Up to 150 mm overall body dimension with fittings
鋼鉄の厚さを直面する	0 mm; die-cast aluminum instrument case
コア密度	2650-2750 kg/m³ for aluminum case components
熱伝導率	150-220 W/(m·K) for the aluminum case
表面仕上げ	Black or dark-gray case with white dial, black pointer and clear lens
ジョイントタイプ	Dual high-low pressure connections with flush-mount ring or surface bracket
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Positive or bidirectional scalePa or inch-water-column dialFlush or surface mountingStatic pressure tips and tubing kit

Planning a Magnehelic Differential Pressure Gauge specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する