İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kontrolü ve Çevre İzleme Sistemleri
Magnehelic Diferansiyel Basınç Ölçüsü
A mechanical low-pressure gauge with a large analog dial for continuous room, filter or duct differential indication without an external power supply.
- No Operating Power
- Large Analog Dial
- Low-Pressure Ranges
- Flush or Surface Mount
Ürün tanıtımı
The Magnehelic differential pressure gauge converts a low pressure difference into pointer movement through a diaphragm and magnetic linkage. The mechanism isolates the process air from the dial train and provides a clear zero-centered or positive scale. With no electrical power required, the gauge remains useful as an independent local indication beside electronic control or monitoring instruments. Front zero adjustment, high and low ports and flush-mount hardware support straightforward installation on cleanroom walls and filter housings.
Ana Özellikler
A large white dial and black pointer allow quick condition checks at normal viewing distance.
Diaphragm and magnetic linkage separate the pressure chamber from the pointer mechanism.
Front zero adjustment permits routine correction without opening the instrument body.
Müşteri Ürün Sorunları
A local mechanical gauge is most valuable when it stays readable, stable near zero and independent of the main control system.
A power or network interruption removes the only room pressure indication.The mechanical dial continues to show differential pressure without external power.
Small scale markings make low pressure changes hard to judge.A broad circular scale spreads the selected pressure range over a large pointer arc.
Tubing direction is confused during wall installation.Clearly marked high and low ports establish the positive reference side.
The pointer no longer rests at zero after long service.A front-access zero screw permits correction with both ports at equal pressure.
Tipik uygulamalar
Local room-to-room pressure indicationHEPA filter loadingFan and duct pressureAirlock differential indication
Teknik parametreler
Typical materials and dimensions for a cleanroom mechanical differential pressure gauge are listed below.
| Temel malzemeler | Silicone diaphragm with die-cast aluminum case, magnetic linkage and clear polycarbonate lens |
|---|---|
| Panel kalınlığı | 45-65 mm gauge body depth |
| Effective Width (Etkili Genişlik) | 100-125 mm dial diameter |
| Maksimum uzunluk | Up to 150 mm overall body dimension with fittings |
| Çelik yüz yüze kalınlığı | 0 mm; die-cast aluminum instrument case |
| Core Density (Çekirdek Yoğunluğu) | 2650-2750 kg/m³ for aluminum case components |
| Termal İletkenlik | 150-220 W/(m·K) for the aluminum case |
| Yüzey bitirme | Black or dark-gray case with white dial, black pointer and clear lens |
| Ortak tip | Dual high-low pressure connections with flush-mount ring or surface bracket |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Positive or bidirectional scalePa or inch-water-column dialFlush or surface mountingStatic pressure tips and tubing kit
Planning a Magnehelic Differential Pressure Gauge specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
