English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
مرشح هيبا كوفي الماء
A moisture-resistant HEPA panel using hydrophobic membrane or treated glass media and corrosion-resistant construction for humid cleanroom air systems.
- Hydrophobic Filter Media
- High-Humidity Operation
- Corrosion-Resistant Frame
- Sealed Pack Edges
مقدمة المنتج
The hydrophobic HEPA filter is configured for cleanroom supply or exhaust streams that experience high relative humidity, intermittent condensation or nearby washdown activity. The media pack uses expanded PTFE or a water-repellent treated glass microfibre, with sealed edges that limit moisture entry into the pleat pack. An anodized-aluminium or stainless-steel frame avoids exposed absorbent board, and compatible polyurethane potting anchors the media. Drain-tolerant faceguard details and a closed-cell gasket complete a construction intended to maintain clean geometry in damp service.
الخصائص الرئيسية
Non-absorbent aluminium or stainless-steel framing suits repeatedly humid operating conditions.
Sealed pack edges reduce the risk of moisture tracking between the media and support frame.
A corrosion-resistant faceguard protects pleats without introducing an untreated steel surface.
مخاوف المنتج للعملاء
Water vapour and occasional droplets can raise resistance, weaken untreated pack edges and corrode conventional filter hardware.
Condensation wets the media and sharply increases pressure drop.Hydrophobic filter media resists liquid-water penetration and reduces moisture retention within the pleat structure.
Cardboard or untreated steel components deteriorate in humid service.Anodized aluminium, stainless steel and polymer-compatible seals remove absorbent and corrosion-prone frame materials.
Moisture enters the pack through exposed cut media edges.Continuous perimeter potting isolates the pleat ends and bonds them to the frame.
Water remains trapped behind a dense protective grille.Open corrosion-resistant faceguards and suitable mounting orientation allow the exposed surface to dry.
تطبيقات نموذجية
Humid pharmaceutical processing roomsWashdown-adjacent clean areasBiotechnology exhaust terminalsFood and beverage clean zonesHigh-humidity laboratory ventilation
المعلمات الفنية
Representative construction ranges for a hydrophobic cleanroom HEPA panel are listed below.
| المواد الأساسية | Supported ePTFE membrane or water-repellent treated glass-microfibre HEPA media |
|---|---|
| سمك اللوحة | 69–150 mm overall filter depth |
| العرض الفعال | 305-610 مم عرض الوجه الاسمي |
| الحد الأقصى الطول | ما يصل إلى 1220 مم طول الوجه الاسمي |
| الصلب يواجه سمك | 0.5–0.8 mm stainless-steel or corrosion-coated faceguard |
| الكثافة الأساسية | Approximately 25–45 kg/m³ equivalent hydrophobic media-pack density |
| الموصلية الحرارية | Approximately 0.032–0.043 W/(m·K) for the dry hydrophobic media pack |
| إنهاء السطح | Natural anodized aluminium or brushed stainless steel with non-absorbent sealed edges |
| نوع المشترك | Closed-cell EPDM gasket or polyurethane gel seal with continuous pack potting |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
ePTFE membrane or treated microglass mediaAnodized-aluminium or 304 stainless-steel frameGasket or gel perimeter sealUpstream and downstream corrosion-resistant faceguards
Planning a Hydrophobic HEPA Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
