Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Luftfilter und chemische Filtration
Hydrophobes HEPA-Filter
A moisture-resistant HEPA panel using hydrophobic membrane or treated glass media and corrosion-resistant construction for humid cleanroom air systems.
- Hydrophobic Filter Media
- High-Humidity Operation
- Corrosion-Resistant Frame
- Sealed Pack Edges
Produkteinführung
The hydrophobic HEPA filter is configured for cleanroom supply or exhaust streams that experience high relative humidity, intermittent condensation or nearby washdown activity. The media pack uses expanded PTFE or a water-repellent treated glass microfibre, with sealed edges that limit moisture entry into the pleat pack. An anodized-aluminium or stainless-steel frame avoids exposed absorbent board, and compatible polyurethane potting anchors the media. Drain-tolerant faceguard details and a closed-cell gasket complete a construction intended to maintain clean geometry in damp service.
Key Features
Non-absorbent aluminium or stainless-steel framing suits repeatedly humid operating conditions.
Sealed pack edges reduce the risk of moisture tracking between the media and support frame.
A corrosion-resistant faceguard protects pleats without introducing an untreated steel surface.
Kunden Produktbedenken
Water vapour and occasional droplets can raise resistance, weaken untreated pack edges and corrode conventional filter hardware.
Condensation wets the media and sharply increases pressure drop.Hydrophobic filter media resists liquid-water penetration and reduces moisture retention within the pleat structure.
Cardboard or untreated steel components deteriorate in humid service.Anodized aluminium, stainless steel and polymer-compatible seals remove absorbent and corrosion-prone frame materials.
Moisture enters the pack through exposed cut media edges.Continuous perimeter potting isolates the pleat ends and bonds them to the frame.
Water remains trapped behind a dense protective grille.Open corrosion-resistant faceguards and suitable mounting orientation allow the exposed surface to dry.
Typische Anwendungen
Humid pharmaceutical processing roomsWashdown-adjacent clean areasBiotechnology exhaust terminalsEssen und Getränke Clean ZonesHigh-humidity laboratory ventilation
Technische Parameter
Representative construction ranges for a hydrophobic cleanroom HEPA panel are listed below.
| Core Material | Supported ePTFE membrane or water-repellent treated glass-microfibre HEPA media |
|---|---|
| Panel Dicke | 69–150 mm overall filter depth |
| Effektive Breite | 305 - 610 mm Nenngesichtbreite |
| Maximale Länge | Bis zu 1220 mm Nennfläche |
| Stahl facing Dicke | 0.5–0.8 mm stainless-steel or corrosion-coated faceguard |
| Kerndichte | Approximately 25–45 kg/m³ equivalent hydrophobic media-pack density |
| Thermische Leitfähigkeit | Approximately 0.032–0.043 W/(m·K) for the dry hydrophobic media pack |
| Oberfläche Finish | Natural anodized aluminium or brushed stainless steel with non-absorbent sealed edges |
| Gemeinsamer Typ | Closed-cell EPDM gasket or polyurethane gel seal with continuous pack potting |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
ePTFE membrane or treated microglass mediaAnodized-aluminium or 304 stainless-steel frameGasket or gel perimeter sealUpstream and downstream corrosion-resistant faceguards
Planning a Hydrophobic HEPA Filter specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
