English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
عزل الاحتواء عالية القدرة
A negative-pressure stainless-steel isolator that separates operators from potent compounds during weighing, charging, sampling and other powder-handling operations.
- Negative-Pressure Barrier
- Double Exhaust Filtration
- Integrated Transfer Chamber
- Glove-Based Process Access
مقدمة المنتج
The high-potency containment isolator combines a welded stainless enclosure, sealed viewing panels and glove access with controlled inward airflow. A staged transfer chamber supports material entry and removal without opening the principal process zone directly to the room. Dedicated inlet and exhaust filtration, pressure monitoring and a cleanable lower utility section support repeatable potent-compound handling while keeping process equipment visible and accessible.
الخصائص الرئيسية
Two-stage exhaust filtration provides a redundant barrier for airborne powder.
Four glove ports give operators reach across the three-panel working chamber.
A gasketed side transfer chamber separates material movement from the primary workspace.
مخاوف المنتج للعملاء
Highly potent powders can migrate through open handling steps, expose personnel and make product changeover difficult to control.
Open scooping or charging can disperse potent dust into the room.A sealed negative-pressure chamber keeps manipulation behind glass and glove barriers.
Removing tools or containers can breach the primary workspace.The interlocked side chamber stages transfers before either boundary door is opened.
A single exhaust element offers limited protection during filter loading.Series exhaust stages and monitored airflow provide a more robust airborne-powder barrier.
Residue trapped around fittings lengthens campaign changeover.Smooth stainless surfaces, rounded internal transitions and accessible service connections support wash-down and inspection.
تطبيقات نموذجية
HPAPI dispensing and weighingPotent powder samplingContained reactor or granulator chargingOncology solid-dose development
المعلمات الفنية
Typical configurable construction values for a multi-glove high-potency containment isolator are listed below.
| المواد الأساسية | Welded 316L stainless-steel chamber with laminated safety glass and black butyl gloves |
|---|---|
| سمك اللوحة | 50-100 mm insulated enclosure sections |
| العرض الفعال | 1800-2600 mm usable chamber width |
| الحد الأقصى الطول | Up to 3200 mm overall equipment length |
| الصلب يواجه سمك | 2-3 mm chamber wall and work-surface construction |
| الكثافة الأساسية | 7950-8050 kg/m³ for stainless-steel construction |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Satin exterior with smooth mechanically polished product-contact interior |
| نوع المشترك | Fully welded chamber with gasketed viewing panels, glove rings and interlocked transfer doors |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Integrated wash-in-place spray systemBag-in/bag-out exhaust filter housingsRapid transfer or split butterfly valve interfacesApplication-specific process equipment integration
Planning a High-Potency Containment Isolator specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
