High-potency containment isolator complete three-quarter view with four glove ports and transfer chamber

Peralatan Bilik Bersih Spesifik Industri

Isolator Kandungan Potensi Tinggi

A negative-pressure stainless-steel isolator that separates operators from potent compounds during weighing, charging, sampling and other powder-handling operations.

Negative-Pressure Barrier
Double Exhaust Filtration
Integrated Transfer Chamber
Glove-Based Process Access

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The high-potency containment isolator combines a welded stainless enclosure, sealed viewing panels and glove access with controlled inward airflow. A staged transfer chamber supports material entry and removal without opening the principal process zone directly to the room. Dedicated inlet and exhaust filtration, pressure monitoring and a cleanable lower utility section support repeatable potent-compound handling while keeping process equipment visible and accessible.

Ciri-ciri Utama

Negative chamber pressure promotes inward leakage at the containment boundary.

Two-stage exhaust filtration provides a redundant barrier for airborne powder.

Four glove ports give operators reach across the three-panel working chamber.

A gasketed side transfer chamber separates material movement from the primary workspace.

Kebimbangan Produk Pelanggan

Highly potent powders can migrate through open handling steps, expose personnel and make product changeover difficult to control.

Open scooping or charging can disperse potent dust into the room.A sealed negative-pressure chamber keeps manipulation behind glass and glove barriers.

Removing tools or containers can breach the primary workspace.The interlocked side chamber stages transfers before either boundary door is opened.

A single exhaust element offers limited protection during filter loading.Series exhaust stages and monitored airflow provide a more robust airborne-powder barrier.

Residue trapped around fittings lengthens campaign changeover.Smooth stainless surfaces, rounded internal transitions and accessible service connections support wash-down and inspection.

Permohonan yang biasa

HPAPI dispensing and weighingPotent powder samplingContained reactor or granulator chargingOncology solid-dose development

Parameter teknikal

Typical configurable construction values for a multi-glove high-potency containment isolator are listed below.

Bahan Teras	Welded 316L stainless-steel chamber with laminated safety glass and black butyl gloves
Ketebalan Panel	50-100 mm insulated enclosure sections
Lebar berkesan	1800-2600 mm usable chamber width
Panjang maksimum	Up to 3200 mm overall equipment length
Keluli Menghadapi Ketebalan	2-3 mm chamber wall and work-surface construction
Ketumpatan teras	7950-8050 kg/m³ for stainless-steel construction
Kekonduksian Terma	14-16 W / (m · K) untuk keluli tahan karat austenit
Kemasan permukaan	Satin exterior with smooth mechanically polished product-contact interior
Jenis Bersatu	Fully welded chamber with gasketed viewing panels, glove rings and interlocked transfer doors
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Integrated wash-in-place spray systemBag-in/bag-out exhaust filter housingsRapid transfer or split butterfly valve interfacesApplication-specific process equipment integration

Planning a High-Potency Containment Isolator specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami