High-potency containment isolator complete three-quarter view with four glove ports and transfer chamber

산업별 클린룸 장비

고전력 격리기 (High - Potency Containment Isolator)

A negative-pressure stainless-steel isolator that separates operators from potent compounds during weighing, charging, sampling and other powder-handling operations.

Negative-Pressure Barrier
Double Exhaust Filtration
Integrated Transfer Chamber
Glove-Based Process Access

견적 요청 제품 찾아보기

상품 소개

The high-potency containment isolator combines a welded stainless enclosure, sealed viewing panels and glove access with controlled inward airflow. A staged transfer chamber supports material entry and removal without opening the principal process zone directly to the room. Dedicated inlet and exhaust filtration, pressure monitoring and a cleanable lower utility section support repeatable potent-compound handling while keeping process equipment visible and accessible.

주요 기능

Negative chamber pressure promotes inward leakage at the containment boundary.

Two-stage exhaust filtration provides a redundant barrier for airborne powder.

Four glove ports give operators reach across the three-panel working chamber.

A gasketed side transfer chamber separates material movement from the primary workspace.

고객 제품 관심사

Highly potent powders can migrate through open handling steps, expose personnel and make product changeover difficult to control.

Open scooping or charging can disperse potent dust into the room.A sealed negative-pressure chamber keeps manipulation behind glass and glove barriers.

Removing tools or containers can breach the primary workspace.The interlocked side chamber stages transfers before either boundary door is opened.

A single exhaust element offers limited protection during filter loading.Series exhaust stages and monitored airflow provide a more robust airborne-powder barrier.

Residue trapped around fittings lengthens campaign changeover.Smooth stainless surfaces, rounded internal transitions and accessible service connections support wash-down and inspection.

일반적인 응용 프로그램

HPAPI dispensing and weighingPotent powder samplingContained reactor or granulator chargingOncology solid-dose development

기술 매개변수

Typical configurable construction values for a multi-glove high-potency containment isolator are listed below.

핵심 재료	Welded 316L stainless-steel chamber with laminated safety glass and black butyl gloves
패널 두께	50-100 mm insulated enclosure sections
유효 폭	1800-2600 mm usable chamber width
최대 길이	Up to 3200 mm overall equipment length
강철 면면 두께	2-3 mm chamber wall and work-surface construction
코어 밀도	7950-8050 kg/m³ for stainless-steel construction
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Satin exterior with smooth mechanically polished product-contact interior
접합 유형	Fully welded chamber with gasketed viewing panels, glove rings and interlocked transfer doors
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Integrated wash-in-place spray systemBag-in/bag-out exhaust filter housingsRapid transfer or split butterfly valve interfacesApplication-specific process equipment integration

Planning a High-Potency Containment Isolator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.