English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ESD والمنتجات المضادة للساكنة
ESD اختبار الموظفين
The ESD Personnel Tester combines grounding-device verification, operator identification and access-control connectivity in a freestanding station for electrostatic protected area entrances.
- One entry station verifies wrist-strap and independent left/right footwear grounding paths.
- Screen, high/pass/low lamps and touch electrode give operators an immediate test sequence.
- RFID-ready identification and relay options support controlled access and traceable records.
مقدمة المنتج
This integrated entry station uses two electrically isolated stainless footwear plates, a wrist-cord socket and a broad metal touch electrode to check worn personnel grounding equipment. A blue display presents measurement or operating prompts, while separate high, pass and low lamps provide an easily recognized result. The reader area can identify authorized personnel before the test, and an optional relay or data interface can pass an approved result to a door, turnstile or local record system. The tester head is supported by a brushed-stainless post above a stable charcoal platform for repeated industrial use.
الخصائص الرئيسية
Dedicated wrist-strap socket supports worn-strap verification at the same station.
Large stainless touch electrode initiates the measurement without a mechanical key switch.
Blue display and red/green/red status lamps separate instructions from pass/fail recognition.
Integrated reader area supports RFID badge identification when specified.
Output options can interlock a door, turnstile or other EPA access device after a valid test.
Brushed-stainless contact surfaces are accessible for routine inspection and cleaning.
مخاوف المنتج للعملاء
An entry tester must verify several grounding paths without slowing personnel flow, associate the result with the correct operator and prevent an incomplete test from being treated as authorization.
A shared footwear contact can hide a failed shoe or heel grounder.Two isolated plates preserve separate left- and right-foot measurements.
Wrist straps and footwear require separate checkpoints.The combined head provides a wrist input, footwear circuits and one touch-operated sequence.
Operators misread a numerical result at a busy entrance.A screen supplies prompts while dedicated high, pass and low lamps communicate the outcome at a glance.
Paper logs cannot reliably associate a test with a person.An RFID-ready reader and optional data interface link identification to the recorded test event.
A failed or skipped test does not stop entry to a sensitive area.A configurable relay output can release an access device only after the required test returns a valid pass.
تطبيقات نموذجية
Controlled entrances to electronics manufacturing EPAs.Semiconductor assembly and test facilities.Clean manufacturing gowning and personnel-transition zones.Static-sensitive laboratories, repair centers and component stores.Workplaces requiring operator identification before ESD compliance verification.
المعلمات الفنية
The values below describe a representative combined personnel-test station. Resistance limits, operator-identification method, result storage, communications and access-control output can be selected to match the facility ESD control plan.
| المواد الأساسية | Brushed-stainless footwear electrodes and support post with flame-retardant ABS tester enclosure |
|---|---|
| سمك اللوحة | 2.0–4.0 mm molded tester-head and base-wall thickness |
| العرض الفعال | 420–560 mm usable station width |
| الحد الأقصى الطول | Up to 750 mm platform depth |
| الصلب يواجه سمك | 1.0–1.5 mm stainless contact-plate facing thickness |
| الكثافة الأساسية | 7800–8000 kg/m³ stainless-steel density |
| الموصلية الحرارية | 14–17 W/(m·K) for stainless contact and support components |
| إنهاء السطح | Brushed stainless electrodes and post with textured charcoal housing and base |
| نوع المشترك | Isolated dual-foot plates and wrist input linked to a touch tester, display, reader and optional relay output |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Selectable wrist-strap and footwear resistance limits.RFID, barcode or keypad operator identification.Local result storage or network data export.Dry-contact relay for door, turnstile or signal-tower integration.Audible prompt and alarm configurations.Alternative platform width, post height, power input and communication interface.
Planning a ESD Personnel Tester specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
