ESD personnel tester with dual foot plates display touch electrode and RFID reader

Produk ESD dan Antistatik

ESD Personil Tester

The ESD Personnel Tester combines grounding-device verification, operator identification and access-control connectivity in a freestanding station for electrostatic protected area entrances.

One entry station verifies wrist-strap and independent left/right footwear grounding paths.
Screen, high/pass/low lamps and touch electrode give operators an immediate test sequence.
RFID-ready identification and relay options support controlled access and traceable records.

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This integrated entry station uses two electrically isolated stainless footwear plates, a wrist-cord socket and a broad metal touch electrode to check worn personnel grounding equipment. A blue display presents measurement or operating prompts, while separate high, pass and low lamps provide an easily recognized result. The reader area can identify authorized personnel before the test, and an optional relay or data interface can pass an approved result to a door, turnstile or local record system. The tester head is supported by a brushed-stainless post above a stable charcoal platform for repeated industrial use.

Fitur utama:

Split footwear electrodes evaluate the grounding path through each foot independently.

Dedicated wrist-strap socket supports worn-strap verification at the same station.

Large stainless touch electrode initiates the measurement without a mechanical key switch.

Blue display and red/green/red status lamps separate instructions from pass/fail recognition.

Integrated reader area supports RFID badge identification when specified.

Output options can interlock a door, turnstile or other EPA access device after a valid test.

Brushed-stainless contact surfaces are accessible for routine inspection and cleaning.

Kekhawatiran produk pelanggan

An entry tester must verify several grounding paths without slowing personnel flow, associate the result with the correct operator and prevent an incomplete test from being treated as authorization.

A shared footwear contact can hide a failed shoe or heel grounder.Two isolated plates preserve separate left- and right-foot measurements.

Wrist straps and footwear require separate checkpoints.The combined head provides a wrist input, footwear circuits and one touch-operated sequence.

Operators misread a numerical result at a busy entrance.A screen supplies prompts while dedicated high, pass and low lamps communicate the outcome at a glance.

Paper logs cannot reliably associate a test with a person.An RFID-ready reader and optional data interface link identification to the recorded test event.

A failed or skipped test does not stop entry to a sensitive area.A configurable relay output can release an access device only after the required test returns a valid pass.

Aplikasi yang Tipis

Controlled entrances to electronics manufacturing EPAs.Semiconductor assembly and test facilities.Clean manufacturing gowning and personnel-transition zones.Static-sensitive laboratories, repair centers and component stores.Workplaces requiring operator identification before ESD compliance verification.

Parameter teknis

The values below describe a representative combined personnel-test station. Resistance limits, operator-identification method, result storage, communications and access-control output can be selected to match the facility ESD control plan.

Bahan inti	Brushed-stainless footwear electrodes and support post with flame-retardant ABS tester enclosure
Ketebalan Panel (Panel Thickness)	2.0–4.0 mm molded tester-head and base-wall thickness
Efektif lebar	420–560 mm usable station width
Panjang maksimum	Up to 750 mm platform depth
Baja menghadap ketebalan	1.0–1.5 mm stainless contact-plate facing thickness
Kepadatan inti (core density)	7800–8000 kg/m³ stainless-steel density
Konduktivitas Termal (Thermal Conductivity)	14–17 W/(m·K) for stainless contact and support components
Permukaan selesai	Brushed stainless electrodes and post with textured charcoal housing and base
Jenis Bersama	Isolated dual-foot plates and wrist input linked to a touch tester, display, reader and optional relay output
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Selectable wrist-strap and footwear resistance limits.RFID, barcode or keypad operator identification.Local result storage or network data export.Dry-contact relay for door, turnstile or signal-tower integration.Audible prompt and alarm configurations.Alternative platform width, post height, power input and communication interface.

Planning a ESD Personnel Tester specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami